|
|
|
|
Joined: Oct 2007
Posts: 37
Member
|
|
Member
Joined: Oct 2007
Posts: 37 |
We have 2-Cab 7200 with MCP v4.21c LCP v4.14 and 2 x 4BRI Cards v6.01 - Everything was stable up to about a month ago when the one of the BRI cards began restarting every few minutes; cutting calls in the process. We moved the BRI cards to C2-S4 / C2-S5 and it settled down again. Last week the nonsense started again. We've swapped cards around ; replaced cards ; nothing helps!
Anyone come accross this before?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2005
Posts: 574
Member
|
|
Member
Joined: Jun 2005
Posts: 574 |
i always try to put cards in first cab in c1-s4 onwards there was a problem when 7200 first came out about where the cards should go but i never had that problem
|
|
|
|
|
Joined: Oct 2007
Posts: 37
Member
|
|
Member
Joined: Oct 2007
Posts: 37 |
Right! BRI should not go in S1 or S2 as this causes "clicking" on lines. But the fault (apparently) lay somewhere else... yesterday we isolated one faulty port on 16TRK (C1-S2). Once that card was pulled there were no more BRI disconnects/restarts! Still monitoring to be sure.
|
|
|
|
|
Joined: Oct 2007
Posts: 37
Member
|
|
Member
Joined: Oct 2007
Posts: 37 |
Bad News! When we restored the system (cabs, cards and DB) to the original setup this morning the BRI's started playing up again. Now with a new cab the BRI clicking sounds more like a popcorn machine on steroids ... we are on site from morn till late nite and its wearing us out.
|
|
|
|
Forums84
Topics94,518
Posts639,976
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
