web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#435447 10/21/09 12:48 PM
Joined: Jan 2006
Posts: 312
Member
OP Offline
Member
Joined: Jan 2006
Posts: 312
Alright, I have 4 different 100 systems 2 have a problem with a weird clicking or poping noise on intercom and outside calls on several stations. then 2 have trouble getting a couple of outside auto attendants to accept dtmf tones, they just keep playing the attendant message and its like they never recieve tone(I am calling into them from these 100's over a pri circuit) almost all other auto attendants work properly.

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#435448 10/21/09 09:19 PM
Joined: Jun 2005
Posts: 574
Member
Offline
Member
Joined: Jun 2005
Posts: 574
first thing that came into my head when you said clicking noises on outside calls was change the dli card but you say also on intercom calls is the extns on one card or back plane might be faulty you also say about auto attend is that on voicemail or or aa card

#435449 10/22/09 01:19 AM
Joined: Aug 2006
Posts: 78
Member
Offline
Member
Joined: Aug 2006
Posts: 78
Bad power supply can cause weird things. So i suggest you to change the power supply.

Mario


Mario Gelinas
IT Technician | Technicien TI

Barrette Structural

555 rang St-Malo, Trois-Rivières, Qc, CA, G8V 0A8
D: 819.374.6061 x2331 F: 819.374.4527
www.barrettestructural.com

#435450 10/22/09 02:25 AM
Joined: Jan 2006
Posts: 312
Member
OP Offline
Member
Joined: Jan 2006
Posts: 312
Yes I am going to definitely take a look at power supply, I have mainly had the complaint at 1 site on station 204 which is on backplane, the other is 210 at another site, but both are similar complaints, the 204 cannot hear the noise but outside callers and intercom callers do, we have replaced wire & keyset . The auto attendant is actually 1 we are calling into , but it will not respond to our dtmf tones. We have replaced a bunch of the 100 power supplies, so the 1st problem could be that?

#435451 10/22/09 04:08 AM
Joined: Feb 2008
Posts: 326
Member
Offline
Member
Joined: Feb 2008
Posts: 326
With the AA not responding to dtmf, is that also from a specific phone or only from outside trunk calls or not responding at all - and does it happen on all VM ports?


~ Marty

Sometimes there ARE ghosts in the machine. I use MSN Live, ask me for the addy if you want.

Never, ever, argue with an idiot. They'll drag you down to their level and beat you with experience

http://www.vernontelecom.com
#435452 10/22/09 08:18 AM
Joined: Jan 2006
Posts: 312
Member
OP Offline
Member
Joined: Jan 2006
Posts: 312
like I say its a different system we are calling into from 2 100 systems on all phones from 2 different cities...

#435453 10/22/09 06:11 PM
Joined: Feb 2008
Posts: 326
Member
Offline
Member
Joined: Feb 2008
Posts: 326
is it possible to replicate while you are on site with hyperterm connected and watching port activity? Is the PRI on the system with the voicemail that is not responding to dtmf or are you calling out to troubleshoot from systems with PRI but the vmail system has analog trunks?


~ Marty

Sometimes there ARE ghosts in the machine. I use MSN Live, ask me for the addy if you want.

Never, ever, argue with an idiot. They'll drag you down to their level and beat you with experience

http://www.vernontelecom.com
#435454 10/26/09 01:59 PM
Joined: Jan 2006
Posts: 312
Member
OP Offline
Member
Joined: Jan 2006
Posts: 312
sorry for the confussion. I am using a officeserv 100 and manually dialing out to ABC Company with a unknown system and auto attendant and it doesn't recognize my dtmf tones, only a couple of number are doing this, but always about 3 or 4 locations.

#435455 10/27/09 06:23 AM
Joined: Mar 2009
Posts: 33
Member
Offline
Member
Joined: Mar 2009
Posts: 33
Change setting in XXX DTMF to INBAND RFC 2833

EDIT: Please do not post tech level programming information in the public section.


Josh Carroll
JE Systems
Intertel/Mitel | Samsung | Toshiba | X Blue
#435456 10/27/09 10:50 AM
Joined: Feb 2005
Posts: 137
Member
Offline
Member
Joined: Feb 2005
Posts: 137
The PRI issue can be fixed by turning on the ISDN PROCON function to on. This is the ISDN call progress function meaning that with that off (which is default) the PRI may not recognize that the auto attendant has answered and when a PRI doesn’t see a connect signal it doesn’t pass the DTMF. Bumped into this one many times.

Page 1 of 2 1 2

Moderated by  nameless, pvj 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,710 CTX100 install
186,795 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
jc2it 4
teleco 4
Who's Online Now
1 members (Toner), 163 guests, and 239 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5