|
|
|
|
Joined: Oct 2002
Posts: 597
Member
|
|
Member
Joined: Oct 2002
Posts: 597 |
I have to go out tomm to install a MOH on a 50si and I can't find my manual. If I remember correctly it is red/slate pair and the option has to be set to XXXX in mmc XXX for each trunk. Could someone confirm this for me? Also there is a misc1 card in the cabinet if that makes a difference. Thanks guys
EDIT: Please do not post tech level programming in the public section.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2007
Posts: 1,218
Member
|
|
Member
Joined: May 2007
Posts: 1,218 |
I cannot find my old manual, but I believe it's the same as the 100 series.
If that's correct, the color code on the block is Yellow/Blue and there is there is a jumper inside the cabinet to change it from the internal chimes to the external source.
You are correct regarding the need to assign it to each trunk under Assign Trunk MOH Source.
Again... I've only worked on one 50si and I don't have a manual.
|
|
|
|
|
Joined: Nov 2005
Posts: 148
Member
|
|
Member
Joined: Nov 2005
Posts: 148 |
yellow/blue is correct. (from 50si manual)
In the back of slot 3 ,set switch S1 (really a jumper) to music on hold external source.
From putting alot of these in the port you will assign trunks and stations to is 3701
Good luck
Dennis
Dennis
Samsung Authorized Dealer, AVAYA reseller, One Communications Team Partner
|
|
|
|
Forums84
Topics94,521
Posts639,995
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
