|
|
|
|
Joined: Sep 2007
Posts: 8
Member
|
|
Member
Joined: Sep 2007
Posts: 8 |
We have a Prostar DCS system that's been working fine ... until today. Now we're getting a "VM ALARM" message displayed on a phone. When I try to connect to the svmi-8 through the serial port on a PC, I see the SVMI-8 splash screen and then a bunch a garbage characters starts scrolling on the screen. After a about a minute, I'll see the splash screen again and then the scrolling garbage again. (I don't have a baud rate or parity issue with the serial port). I believe the SVMI-8 is rebooting over and over. Also, the auto-attendant no longer answers, so I'm sure it's related. Could this be due to the 80% threshold in MMC XXX? I can't find anything that says what the system does when the theshold is exceeded. How can I clear the VM ALARM and figure out what's going on?
Please do not post MMC's
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2003
Posts: 6,768
Member
|
|
Member
Joined: Jul 2003
Posts: 6,768 |
This is going to have to be dealt with at the DOS level. We cannot support this in the open forum. We can help you via PM or help you find a local dealer.
|
|
|
|
|
Joined: Sep 2007
Posts: 8
Member
|
|
Member
Joined: Sep 2007
Posts: 8 |
Can somebody PM me or send an e-mail? I can really use the help.
|
|
|
|
Forums84
Topics94,518
Posts639,976
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
309
guests, and
43
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
