|
|
Joined: Sep 2006
Posts: 34
Member
|
OP
Member
Joined: Sep 2006
Posts: 34 |
I am presently working on a compact dcs v2.6 with a ram 1,2x4 SLI card, 2x4 DLI card.Trying to install MOH external muisic source. Program MMC 308,309,408. Tried to program 372 for customer music source but will only let me program 371 for which a thought for internal music source. Still punch down on Y-BR and BR-Y pin 44 and 19 on 66block.I hear a sound which sounds like white noise through the keyset speakers but no music.I have rigged the cd player output headset to rj11 jack which goes to Y-BR,BR-Y pair of the 66B. What am i missing?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
Do you show a misc1 card recognized in MMC806?
If so you should have a 2nd MOH on Pair 25 (372) in addition to 1st MOH on Pair 19.
As a first move, I would put a tone generator on Pair 19 to see if you have a bad cord connection.
Just yesterday I popped in on a Toshiba customer that I told to buy a RCA to RCA cord for his announcement player. So what did mister genius do? He went to Radio Shack and bought a 1/8 female adapter because he already had a male 1/8 to RCA cord.
Yes, that old cord was corroded. Amazing how I get some service calls.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
|
Joined: Sep 2006
Posts: 34
Member
|
|
OP
Member
Joined: Sep 2006
Posts: 34 |
The system do not show a misc 1 card.
|
|
|
|
|
Joined: Jun 2007
Posts: 115
Member
|
|
Member
Joined: Jun 2007
Posts: 115 |
Didn't the compact have a jumper which must be changed for inter/external music. Same as dcs100 os 100
|
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
Did you LOOK at MMC806 or DO MMC806?
To DO MMC806, you hit the right soft key each time you push the volume up button to a new card slot.
There was an [Int] and [Ext] jumper on the old 816 electronic system and on the 50si and iDCS100 but not the Compact, I just physically looked at one to be positive and there is no jumper.
If all else fails, do a MMC811 and start programming from scratch.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
|
Joined: Sep 2006
Posts: 34
Member
|
|
OP
Member
Joined: Sep 2006
Posts: 34 |
DO i need a MISC 1 card to complete MOH programming on this system
|
|
|
|
|
Joined: Sep 2006
Posts: 34
Member
|
|
OP
Member
Joined: Sep 2006
Posts: 34 |
What type of software would i need to add callers ID to this system?
|
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
You must have 4 chip CID software and a RAM2 cartridge.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
198
guests, and
326
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
