|
|
|
|
Joined: May 2011
Posts: 14
Member
|
|
Member
Joined: May 2011
Posts: 14 |
Hi there,
I have a 7200 that uses VoIP to dial out. The issue is that after approx. 6 min 30 sec the call gets cut off.
System is running ver 4.53c the MGI card is ver 1.27
I have defaulted the system and only setup the VoIP peering , but the problem remains.
According to the Distributor that had a look at the trace the 7200 is "ignoring" the incoming options for some reason.
Any help would be appreciated.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
Did you do the trace or did the carrier?
If the carrier did it and they are saying that, then its a probably a port forward issue on the router
|
|
|
|
|
Joined: May 2011
Posts: 14
Member
|
|
Member
Joined: May 2011
Posts: 14 |
Hi there,
I did the trace using wireshark and a lvl 2 switch with port spanning/mirroring.
|
|
|
|
|
Joined: May 2011
Posts: 14
Member
|
|
Member
Joined: May 2011
Posts: 14 |
Problem solved. Was issue with port forwarding on the ADSL modem.
|
|
|
|
Forums84
Topics94,522
Posts639,996
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
268
guests, and
45
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
