|
|
|
|
Joined: Jul 2006
Posts: 93
Member
|
|
Member
Joined: Jul 2006
Posts: 93 |
I believe the short-lived OS7100 *lite* only supports a uni module in slot #1 and can't be expanded. Is this limitation caused by the cabinet, the MP10, the firmware, or a combination ?
Basically what needs to be replaced so the system can be expanded, please PM if the answer isn't for general distribution.
Tom
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2010
Posts: 139
Member
|
|
Member
Joined: Mar 2010
Posts: 139 |
Oddly its the MP10 that stops the last slot being used. I changed the chasis over and it would not boot until i changed the mp10 and reprogrammed.
|
|
|
|
|
Joined: Aug 2009
Posts: 75
Member
|
|
Member
Joined: Aug 2009
Posts: 75 |
Dead right - though be careful with some of the chassis - Samsung filled the connector on the backplane with glue to stop a card being installed!!
They did the same with the last slot in the OS7200 Lite too.
You'll definately have to swap the Processor card out - you'll replace with MP10a now as the MP10 is end of life.
|
|
|
|
|
Joined: Aug 2009
Posts: 75
Member
|
|
Member
Joined: Aug 2009
Posts: 75 |
Off topic
TDW - where in York are you? I ask as that's where i'm based!
|
|
|
|
Forums84
Topics94,513
Posts639,940
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
282
guests, and
44
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
