web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#440408 09/27/11 01:25 PM
Joined: May 2004
Posts: 336
Member
OP Offline
Member
Joined: May 2004
Posts: 336
Hi all,
I'm currently installing on the bench:

7200S with a 16 OAS networked to a 7200 with a 16 OAS via SPNET and I can't get them to talk, when I dial across from either side I get no user response.

1) I have both systems connected to 1 netgear router with DHCP disabled and manually entered the ip address for both MCP and both OAS with the router as the gateway.

2) I can ping all 4 devices

3) I'm not getting a Svc2 light on either OAS but 1-3-4 are lit on both

4) the netgear router sees all the devices including my laptop and I can access Device manager for either system with my laptop connected to the router

Am I missing something in the samsung programming or is it the router set up.

As always thanks in advance

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Aug 2011
Posts: 219
Member
Offline
Member
Joined: Aug 2011
Posts: 219
Set all OAS ports to MGI in MMC 858 and put all the MGI ports to be members in MMC 615. Open ports 6000-9001 and 30000-30032 on the router. If it fails try downgrading both OAS cards and reprogram. :toast:


heads up
Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
No user response means that the MP cards can't talk to each other, its not getting to the stage where the OAS/MGI is used.

Make sure TCP 6100 is allowed between both systems.

Are these systems on a private LAN or via the internet?

If via the internet do you have the public ip address's entered into MMC820/830/831?

Joined: Nov 2002
Posts: 343
Member
Offline
Member
Joined: Nov 2002
Posts: 343
Check your LCR table to ensure correct entries.

Joined: Apr 2008
Posts: 457
Member
Offline
Member
Joined: Apr 2008
Posts: 457
Also make sure you have an incoming DID route.


Bobby Mreen
Communications Technician
Joined: May 2004
Posts: 336
Member
OP Offline
Member
Joined: May 2004
Posts: 336
(Set all OAS ports to MGI in MMC 858 and put all the MGI ports to be members in MMC 615.)

Thanks for all the responses^^^^^ checked that, I also changed the MGI setting on both switches to MGI12/mobex16 which turned on my svr 2 light but didn't help the No user problem

( Open ports 6000-9001 and 30000-30032 on the router.)
(Make sure TCP 6100 is allowed between both systems)

Only using one router can I even do that? ^^^^ when I open the ports it asks for one IP address, so I can't open it up for both sides.

I also tried using just a dumb 5 port Ethernet switch with the same results, but the Ethernet switch is just plug and play with no gateway address,

How would you all set SPNET up on the bench before installing live?

Thanks

Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
If you are setting it up on 1 lan, then you shouldn't need to do any port forwards.

Are the MP/OAS cards on both systems in the same subnet?

If not then you will need the router to route the traffic between both subnets

Joined: May 2004
Posts: 336
Member
OP Offline
Member
Joined: May 2004
Posts: 336
Yep both 255.255.255.0
Both MP/OAS
10.0.2.10
10.0.2.11
10.0.2.21
10.0.2.20
Router gateway =10.0.2.1

I'm wondering if I need port forwarding on the router to tell the ip addresses where to go because without that they may be just sitting in the router going nowhere.

Any thoughts?

Joined: Apr 2008
Posts: 457
Member
Offline
Member
Joined: Apr 2008
Posts: 457
Do you have your link id's set?


Bobby Mreen
Communications Technician
Joined: Nov 2002
Posts: 343
Member
Offline
Member
Joined: Nov 2002
Posts: 343
Pm me a copy of the databases and I will take a look at em for you to see if I see anything.

Page 1 of 2 1 2

Moderated by  nameless, pvj 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,100 Shoretel
187,712 CTX100 install
186,800 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
0 members (), 140 guests, and 24 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5