Log out from Serial port by MGI2 ,,howwwww

Print Thread

Rate Thread

Log out from Serial port by MGI2 ,,howwwww #441082 01/19/12 05:07 PM
Joined: Dec 2010 Posts: 30 Karachi Pakistan Salman Imtiaz Member
Salman Imtiaz Member Joined: Dec 2010 Posts: 30 Karachi Pakistan	Does any body knows how to get trace from MGI2 ,there is serial port on the card but what willbe settings,any help possible??

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: Log out from Serial port by MGI2 ,,howwwww #441083 01/19/12 08:45 PM
Joined: Jun 2006 Posts: 3,004 Likes: 4 Brisbane, Australia nameless Moderator-Samsung
nameless Moderator-Samsung Joined: Jun 2006 Posts: 3,004 Likes: 4 Brisbane, Australia	What do you need to get a trace of? I have only ever used the serial ports for sw upgrades on MGI cards.

Re: Log out from Serial port by MGI2 ,,howwwww #441084 01/20/12 05:34 PM
Joined: Dec 2010 Posts: 30 Karachi Pakistan Salman Imtiaz Member
Salman Imtiaz Member Joined: Dec 2010 Posts: 30 Karachi Pakistan	I connected OS500 & MGI2 with Cisco Router,if i use SIP server Enable & IP address of Cisco router This setup i am able to call cisco IP phone and we have both way communication but when Cisco IP phone call to samsung user there is oneway communication,Cisco people looking for trace from MGI2, If we disable SIP server we cannot call each other and via H.323 it rings to each other but no voice from both ends

Re: Log out from Serial port by MGI2 ,,howwwww #441085 01/20/12 07:26 PM
Joined: Jun 2006 Posts: 3,004 Likes: 4 Brisbane, Australia nameless Moderator-Samsung
nameless Moderator-Samsung Joined: Jun 2006 Posts: 3,004 Likes: 4 Brisbane, Australia	They are after a wireshark trace. You will need to get a manged switch todo it. The cisco guys should be able to do a trace from their end. I tried todo this a few years ago via h323 and sip and never got it to work.

Re: Log out from Serial port by MGI2 ,,howwwww #441086 01/22/12 05:18 PM
Joined: Dec 2010 Posts: 30 Karachi Pakistan Salman Imtiaz Member
Salman Imtiaz Member Joined: Dec 2010 Posts: 30 Karachi Pakistan	Cisco having the Trace when call comes from samsung to Cisci but call made by Cisco its goes to MCP IP address instead of MGI2 IP Address,and the result no trace available for Cisco user.

Re: Log out from Serial port by MGI2 ,,howwwww #441087 01/22/12 10:46 PM
Joined: Jun 2006 Posts: 3,004 Likes: 4 Brisbane, Australia nameless Moderator-Samsung
nameless Moderator-Samsung Joined: Jun 2006 Posts: 3,004 Likes: 4 Brisbane, Australia	The signalling should goto the MCP2 (this is the sip address the cisco guys need to put in their config) and the voice to the MGI2. The SIP packets from the samsung will tell the cisco what ip and port to send the speech to (ie the MGI2 card).

Moderated by nameless, pvj

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems Log out from Serial port by MGI2 ,,howwwww