Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Mar 2001
Posts: 2
Member
OP Offline
Member
Joined: Mar 2001
Posts: 2
System is v6.1i
Has COB, KIB and SIBs.
CPU has following replaceable eproms
ECX EPB V-6.1i G2
ECX EPB V-6.1i G3
ECX 3672 EPB V-6.1i Basic G4
ECX EPB V-6.1i G8
ECX EPB V-6.1i G9

I do not have a manual but have figured out most of the programming including UCD's, have the SMDR working, etc...

Question 1 - What is the latest release software for this system, what would it give me that I don't have and where could I find it ?

Question 2 - How in the WORLD do you program the flex keys on the phones. I can go into admin programming and put CO's on any key, ring day night both, but I can't figure out how to program loop, pool, speed dial, paging etc to the extra keys.
The only thing I can validly dial in the key programming is XXYY where XX is 01-24 (button) and YY is 00-36 (trunks 01-36, or 00 which kills the key). I can also use ## which does the same thing as 00 EXCEPT that 00 allows that blank key to have non-appearing lines via dial code like 9 and ## doesn't (or vice versa, i can't remember right now).
I tried the 96 programming where you do XX Y ZZ where XX is the button and Y is type (CO,Feature etc) and ZZ is CO or other, it doesn't like any of that. It seems to only want 4 digit entry for buttons.

Question 3- When on a call, how do you enter an account code (for my SMDR)

Question 4 - Does anyone have a user guide for the phone, or at least a dial plan with all the feature codes and access codes, I have figured some out (park, ucd, hunt, speed dial programming) but am missing many.

Question 5 - I looked at Vodavi 96, it is really close in programming but not the same, although the admin and maint passwords via pc are the same (smokie and brandy).

When I print the system it has a lot of LCR COS, Routes, Times etc... but I don't see any LCR programs from ext 100 except maybe the L1 to L7 on station programming. (I suspect it is because it does not have the holy grail upgraded chips that have the LCR, remember, my eproms say basic).

Question 6- Has anyone got any tips or tricks, like using "other" than executone chips and maybe putting Vodavi 96 chips in this thing ?

Question 7 - The system is kind of slow (speed dial will hesitate and speed up, if you hit all the line keys really fast the COB's keep up but the lights on the phones lag behind A LOT), did they ever make a hotter CPU chip or board for this system ?

I got the system really cheap and it does what I want and works really great and I could live with it the way it is (well, I REALLY NEED TO KNOW ABOUT THE FLEX KEYS AND ACCOUNT CODE) but otherwise, the rest is just curiousity on my part.

FYI, I used to work for a small interconnect, then Contel-Executone (I know I know, threw all the manuals away), Nortel, Bell Atlantic, GTE and now I manage development of software solutions for DoD and the Feds. Have done Toshiba, Iwatsu, Comdial, AT&T, Nortel Merdian and Norstar, Meridian Mail, CCR, ACD Max, Rolm, you name it... I've seen it somewhere. But I got out of phones and into software and networks about 5 years ago. So I could use a little help here. I have manuals coming in a couple of weeks, but some of these questions won't be in them, and the flex keys and account code I could use ASAP.

Oh, The APL card, it has a connector on it, what can be hooked up to it

Thanks

GA
Joined: Mar 2001
Posts: 2
Member
OP Offline
Member
Joined: Mar 2001
Posts: 2
FYI, Q 2 3 and 4 have been answered thanks to the kind person who sent me a manual.

Still wondering about the other things though, and a new question.

In setting up UCD you can have recordings, the recordings can be CO or SL interfaces. How do you interface to either of these. What are they expecting you to use. If it is a SL port, does it ring the device first to allow the message device to answer and play like an answering machine ?

Why would one choose a CO interface vs a SL interface other than the SL interface can ring until answer (assuming that is what it does)

Thanks


Moderated by  nonameyet, pvj 

Link Copied to Clipboard
Advertising Sponsor
Most Recent 5 Post
Samsung pro star dcs
by bditech - 03/07/21 01:00 AM
Samsung DCS power failure
by Telesystems - 03/06/21 09:55 PM
Samsung pro star dcs
by bditech - 03/06/21 05:09 PM
Old Equipment Plan
by MarkAtLMFJ - 03/05/21 04:41 PM
OS 7400 OAS
by John807 - 03/05/21 04:21 PM
Popular Topics (Views)
Forum Statistics
Forums95
Topics94,290
Posts639,113
Members49,425
Most Online5,661
May 23rd, 2018
Today's Birthdays
[email protected], norb, quartra
Newest Members
Sam Juniper, B Ledford, Jonie4, James Wright, TechnoloJay
49,425 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
dexman 31
Ruben 25
pvj 11
Linked Banner to your Product or Website
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Who's Online Now
22 members (BobRobert, dexman, bditech, sundance, justbill, nortelvoip, Mercenary Roadie, Telesystems, Gary S., Canteleco, teldata1, Ruben, hitechcomm, Retro-Phones, Touch Tone Tommy, Professor Shadow, Coral Tech, hbiss, Butch Cassidy, Keyset6, JBean3329, RM SYSTEMS), 184 guests, and 63 robots.
Key: Admin, Global Mod, Mod
Custom Island 58
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2021
Trusted Partners