|
|
|
|
Joined: Jun 2003
Posts: 2
Member
|
|
Member
Joined: Jun 2003
Posts: 2 |
I am looking for the correct settings to connect to the IDS 42 using hyperterminal on a computer connected through the RS232 port.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2001
Posts: 2,360 Likes: 9
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,360 Likes: 9 |
Speed 9600
bits 8 stop 1 parity none
Should work
|
|
|
|
|
Joined: Jun 2003
Posts: 2
Member
|
|
Member
Joined: Jun 2003
Posts: 2 |
Okay, hyperterminal is set as explained above. after hitting the esc. key we appear to be connected. screen shows password>1, I can not type anything after password>1.
The only keys on the keyboard that work are esc. and the "F" keys. I have tried to hit ctrl D. but the keyboard does not seam to be working correctly. Any other suggestions?
|
|
|
|
|
Joined: Oct 2002
Posts: 30
Member
|
|
Member
Joined: Oct 2002
Posts: 30 |
Do you get the "disclaimer" followed by "Enter Password to select programming mode"?
If so, at this prompt, press ESC.
You'll then get "Enter password> ".
This is where you enter your password, for example, what ever is appropriate for Level 8, Level 1, etc.
Also, I've found that HyperTerminal doesn't work very well, it's better to use Procomm Plus or something that can emulate either the WYSE-50 or TVI-950 terminals.
J.P.
Life is such a sweet insanity, the more you learn, the less you know.
|
|
|
|
Forums84
Topics94,518
Posts639,976
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
