|
Joined: Dec 2008
Posts: 510
Member
|
Member
Joined: Dec 2008
Posts: 510 |
I have a set of cable pulling sleeves in a tool roll, sold by Labor Saving Devices. The set consists of various sizes from one cable to a large bundle of cables. All sizes of these sleeves have worked well.
Bob
With all the variables involved, I am amazed when any voice and data technology works like it is supposed to.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Sep 2010
Posts: 11
Member
|
Member
Joined: Sep 2010
Posts: 11 |
Question to your question..is the building wood frame or steel? I've seen both in hotels. Anyways, I agree with the others here. Fish new would be the way to go.
|
|
|
|
Joined: Sep 2010
Posts: 110
Member
|
Member
Joined: Sep 2010
Posts: 110 |
It is old.... it is brick. It isn't so much a fish as it is feeding the line in from the alley
|
|
|
|
Joined: Sep 2010
Posts: 110
Member
|
Member
Joined: Sep 2010
Posts: 110 |
I'll post some pictures after I go back. It is UGLY. And after I work on it it will still be UGly.
|
|
|
|
Joined: Sep 2010
Posts: 110
Member
|
Member
Joined: Sep 2010
Posts: 110 |
I was up there this week; I even did a little work. There is a little problem though: the hole that the phone line is fed through is small. It is smaller than a glow rod. I suppose I could drill another hole but does anyone have another suggestion?
|
|
|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
Go to Lowes and buy a hole strecher
|
|
|
|
Joined: Dec 2008
Posts: 510
Member
|
Member
Joined: Dec 2008
Posts: 510 |
ReBore-Zitâ„¢ Drill Bits by Labor Saving Devices The ReBore-Zit drill bit is the only drill bit designed to enlarge a previously drilled hole while retaining the existing wire in that hole. The bit is fabricated with a custom made, hollow bodied drill bit containing a free spinning, swivel eyelet mounted to its pilot hole center shaft. Just secure your existing wire onto the eyelet and re-drill your hole to a larger size. The bit will not twist the wire. Available in 3/8â€Â, 1/2â€Â, 3/4â€Â, 1†(final size of re-drilled hole) diameters. Each diameter has an associated pilot hole size. Use the appropriate ReBore-Zit bit to accommodate the pre-existing hole (pilot hole) and step-up in ReBore-Zit sizes until you obtain your desired final hole size.
Bob
With all the variables involved, I am amazed when any voice and data technology works like it is supposed to.
|
|
|
|
Joined: Jun 2006
Posts: 8,735 Likes: 12
Moderator-Nortel, Computers, General
|
Moderator-Nortel, Computers, General
Joined: Jun 2006
Posts: 8,735 Likes: 12 |
Originally posted by Steve Mull: Go to Lowes and buy a hole stretcher They're right between the "checkered paint" and the "sky hooks" :rofl: Steve, you crack me up!
Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons". Dave. (CTUB) Canadian Techs Use Bix!
|
|
|
|
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
|
RIP Moderator-Nisuko-Tie, General
Joined: Jan 2004
Posts: 6,648 |
Originally posted by MooreTel: Originally posted by Steve Mull: [b] Go to Lowes and buy a hole stretcher They're right between the "checkered paint" and the "sky hooks" :rofl: Steve, you crack me up! [/b]that's one of those technologies that we dont export ...especially to the north
Skip ------------------------------------
Serving SW and West central Fl since 1984
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Heck, for a minute I thought you could leave the cable connected at both ends. Not exactly, it just 'keeps track' of the disconnected cable so that you can pull it back through after enlarging the hole without fishing.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
Forums84
Topics94,494
Posts639,868
Members49,836
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
217
guests, and
47
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|