|
|
Joined: Jul 2004
Posts: 6
Member
|
OP
Member
Joined: Jul 2004
Posts: 6 |
NOTE: <Ctrl-P> Esc does the trick!
This is odd. I get the "status" display but when I hit ESC it repaints and usually displays idle: which disappears. I never get the password prompt.
Any ideas? I've reset, reseated boards (desperate measure), powered-down, etc.
Using Procomm at 9600-8-n-1 on same system i originally configured with!
[This message has been edited by gagop (edited August 30, 2004).]
|
|
|
|
|
Joined: Apr 2002
Posts: 1,101
Member
|
|
Member
Joined: Apr 2002
Posts: 1,101 |
Bad I/O port!
Sometimes the ports will transmit, but not recieve.
Is it a I/O expansion board on the CPU?
If all else fails, use a BFH.
|
|
|
|
|
Joined: Sep 2001
Posts: 2,290 Likes: 5
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,290 Likes: 5 |
Your on an Operator port.Press Ctrl P and then you will get a prompt.
|
|
|
|
|
Joined: Apr 2002
Posts: 1,101
Member
|
|
Member
Joined: Apr 2002
Posts: 1,101 |
Great catch PVJ!!
I read past that.
Good Job,
JJ.
If all else fails, use a BFH.
|
|
|
|
|
Joined: Sep 2001
Posts: 2,290 Likes: 5
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,290 Likes: 5 |
Sometimes I get lucky ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/forum/smile.gif)
|
|
|
|
Forums84
Topics93,884
Posts637,026
Members49,675
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
94
guests, and
16
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
