|
|
Joined: Nov 2004
Posts: 6
Member
|
OP
Member
Joined: Nov 2004
Posts: 6 |
With help, an old defaulted 228 is back in operation but the backup with the latest settings, including the correct "office exchange", was not readable.
Being a total novice on this system and not much better on telephony in general, I could use help on how to set the exchange. Looking on LCR screens, it clearly shows the old exchange (was 836) but I have found no way to change the setting to the new one (happens to be 661).
Main menu screen says Eclipse 2.0 if that's important.
Many thanks, -dennis
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
So the switch has LCR loaded?I don't think you can change the exchange in LCR but I am not 100% sure of it.
|
|
|
|
|
Joined: Apr 2002
Posts: 1,101
Member
|
|
Member
Joined: Apr 2002
Posts: 1,101 |
LCR is a downloaded feature from the manufacturer. It is setup for each location, switch, and owner of equipment.
You can disable or remove LCR if you are not using a PRI/T1.
Good Luck!!
If all else fails, use a BFH.
|
|
|
|
|
Joined: May 2003
Posts: 2,267
Member
|
|
Member
Joined: May 2003
Posts: 2,267 |
If you want to use LCR on your switch, then you will have to get it updated. I believe that Aable communications can do it. I am not sure who else out there might be able to. As state above, I am pretty certain that it is not something you will be able to access or edit. ------------------ Intertel Telephone Repair Executone/Isoetec Telephone Repair [This message has been edited by paul144 (edited November 10, 2004).]
|
|
|
|
|
Joined: Nov 2004
Posts: 6
Member
|
|
OP
Member
Joined: Nov 2004
Posts: 6 |
Got is solved. The most recent *good* backup used to restore the defaulted system was from the old location/exchange where a T1 was in use. At the new location/exchange, there is no T1 so the fix was to not use LCR as suggested above.
Thanks for your help.
|
|
|
|
Forums84
Topics94,296
Posts638,846
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
