|
|
Joined: Jan 2007
Posts: 81
Member
|
|
Member
Joined: Jan 2007
Posts: 81 |
I'm going to be installing a PRI circuit on a CS200. I have giving the CO guys the info that I could find in ESI literature. Is there any thing else that I need to look out for?
Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2002
Posts: 2,608
Moderator-ESI, Shoretel
|
|
Moderator-ESI, Shoretel
Joined: Aug 2002
Posts: 2,608 |
The typical installation uses NI2 and B8ZS/ESF. Only other info you need is the number of digits the CO will send, any DID info and the number of channels.
|
|
|
|
|
Joined: Nov 2004
Posts: 1,582 Likes: 2
Moderator-ESI - Executone
|
|
Moderator-ESI - Executone
Joined: Nov 2004
Posts: 1,582 Likes: 2 |
Number of digits Must be 4
I can see the light at the end of the tunnel..
Retirement 2019 ( It has happened )
|
|
|
|
|
Joined: Aug 2002
Posts: 2,608
Moderator-ESI, Shoretel
|
|
Moderator-ESI, Shoretel
Joined: Aug 2002
Posts: 2,608 |
Originally posted by nonameyet:
Number of digits Must be 4 You can use 3 digits also....manual reads "up to 4" digits.
|
|
|
|
|
Joined: Jan 2007
Posts: 81
Member
|
|
Member
Joined: Jan 2007
Posts: 81 |
|
|
|
|
|
Joined: Sep 2006
Posts: 59
Member
|
|
Member
Joined: Sep 2006
Posts: 59 |
Don't forget to "Enable" F2135 for DID's. I've caught many a system that was having PRI/DID troubles because someone forgot to enable that.
Oderint dum metuant
|
|
|
|
|
Joined: Oct 2008
Posts: 9
Member
|
|
Member
Joined: Oct 2008
Posts: 9 |
Something to keep in mind, if you use the pilot table you must assign the number of channels alloted for this DID and if you have more than one pilot table entry the combin number for the entire table can not exceed 23 for a full PRI. Example Piolt table 1 555-555-1234, 21 Pilot table 2 555-555-1235, 2. The total=23 Pilot tables are helpfull if you wish to program ringing for a DID the same as you would an analog CO.
|
|
|
|
|
Joined: Jun 2004
Posts: 4,552 Likes: 5
Moderator-Comdial, ESI, Voicemail, Cisco
|
|
Moderator-Comdial, ESI, Voicemail, Cisco
Joined: Jun 2004
Posts: 4,552 Likes: 5 |
Ant C, that's interesting. I've setup Pilot tables before where all of the entries were set to 23. Is that recommendation or requirement documented somewhere?
Justin
|
|
|
|
|
Joined: Jan 2007
Posts: 81
Member
|
|
Member
Joined: Jan 2007
Posts: 81 |
I did run a report on the PRI Status in Reports and it shows the D Channel down. Is this a clock or timing issue with the CO?
Thanks.
|
|
|
|
|
Joined: Aug 2002
Posts: 2,608
Moderator-ESI, Shoretel
|
|
Moderator-ESI, Shoretel
Joined: Aug 2002
Posts: 2,608 |
Can you give us a detailed description of what is happening....your original post talked about an upcoming install and now you are asking questions pertaining to a problem with no description of what that problem is.
Has it been installed and working or is this still a problem with the initial install?
What does ESI tech support say?
|
|
|
|
Forums84
Topics94,515
Posts639,965
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
![[Linked Image]](https://sundance-communications.com/images/banners/nextgen154x64.jpg)
