|
|
|
|
Joined: Jan 2007
Posts: 81
Member
|
|
Member
Joined: Jan 2007
Posts: 81 |
We are just testing with our switch. It is CopperCom softswitch. The problem is the PRI is not allowing incomming DID's or outgoing calls. So basically the switch and phone system are not talking is my guess. Thanks.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2004
Posts: 1,582 Likes: 2
Moderator-ESI - Executone
|
|
Moderator-ESI - Executone
Joined: Nov 2004
Posts: 1,582 Likes: 2 |
flip the w/bl and w/or pairs, is the cabinet syncing up? the led on the card with the pri on it should Not be blinking.
I can see the light at the end of the tunnel..
Retirement 2019 ( It has happened )
|
|
|
|
|
Joined: Jan 2007
Posts: 81
Member
|
|
Member
Joined: Jan 2007
Posts: 81 |
|
|
|
|
|
Joined: Nov 2004
Posts: 1,582 Likes: 2
Moderator-ESI - Executone
|
|
Moderator-ESI - Executone
Joined: Nov 2004
Posts: 1,582 Likes: 2 |
make a loopback connector, make sure you can sync up Your cabinet(get the led to stop blinking)
Has the provider actually ' turned up ' the service?
Also, when I said to flip the w/bl - w/or I was talking about on the RJ45 .....
I can see the light at the end of the tunnel..
Retirement 2019 ( It has happened )
|
|
|
|
|
Joined: Jan 2007
Posts: 81
Member
|
|
Member
Joined: Jan 2007
Posts: 81 |
I loop backed the card and the led did stop blinking. Then I talked to the CO tech and they over bilt the card in the switch so it sounds like they have to find a new position for the PRI span on the switch.
|
|
|
|
Forums84
Topics94,515
Posts639,965
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
