sundance-communications.com/forum Forums Other TDM Phone Systems Executone-Isoetec Telephones & Systems Analog phone transfer?

Is there a method to transfer a phone call from an analog phone to an outside line for this system?

We're using AVST 7.0 as our voicemail system (which connects via 8 analog lines). I would like to have an option on my voicemail to transfer the caller to my cell phone...

which Executone system?

Executon IDS Eclips ver. 3.0.0

I believe you would have to program this on the G screen.

forward to station speed 30:
send the call from vms to dummy analog port and have that port forwarded to station speed dial 30 which is reserved for off net forwarding. the speed bin number must be programmed first.

I did this. I programmed a 839 key with a subcode of 030. I programmed my offnet number in the station's speed dial bin #30. But how do I activate the forwarding in night mode on a single line phone?

On the G screen there is a setting for day and if you press S while on this screen it will change to night from day.

I know that, pvj. I guess I'm a little confused about how this works. What should I put in the G screen to activate the fwd to station speed dial bin #30?

I guess this doesn't totally answer my question.

What I'm looking to do is this:

When people reach my voicemail (AVST 7.5) I want them to be able to press a button to be transfered to my cell phone (so people can call my cell without my having to give out the number).

First you have to set up your mailbox so it has the ability to transfer callers to more than one destination....(ccr application)when callers dial 1 for example they would be transfered to an anolog ext that is not part of your vms. In the g screen that ext would have to be programmed in the all column to fwd to system speed dial.