|
|
Joined: May 2005
Posts: 141
Member
|
OP
Member
Joined: May 2005
Posts: 141 |
We are installing an Adix System that has 4x8 Combo cards in it. I have an Adix Manual, but it does not show the wiring on those cards. We have the lines and stations connected and everything is working, but we cannot figure out where to punch down the paging tip and ring. I have tried some web sites with manuals, but they all have the same one I do. Can anyone help?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2005
Posts: 141
Member
|
|
OP
Member
Joined: May 2005
Posts: 141 |
Further Info - This is an Adix IX with a CPU16M
|
|
|
|
|
Joined: Apr 2004
Posts: 284
Member
|
|
Member
Joined: Apr 2004
Posts: 284 |
You need an additional card for overhead paging such as a MISC or EDVIF.
I thought you said that your system was down...
|
|
|
|
|
Joined: Jun 2005
Posts: 422
Moderator-Iwatsu
|
|
Moderator-Iwatsu
Joined: Jun 2005
Posts: 422 |
Not to open up a can of worms, but I have been guilty of breaking open an MKT phone and attaching the speaker leads to the paging equipment. Then it is just programming a DSS key.
|
|
|
|
|
Joined: Jan 2005
Posts: 15,379 Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,379 Likes: 13 |
Can of worms? Hey, Viking Electronics makes a unit (#M2W) that's made specifically for this purpose and it even includes a paging horn.
Ed Vaughn, MBSWWYPBX
|
|
|
|
|
Joined: Apr 2004
Posts: 284
Member
|
|
Member
Joined: Apr 2004
Posts: 284 |
Originally posted by Jadix:
Not to open up a can of worms, but I have been guilty of breaking open an MKT phone and attaching the speaker leads to the paging equipment. Then it is just programming a DSS key. Been there, done that. Good indication of this is a phone strapped to the wall high above the phone system, or a phone up high near a paging horn 
I thought you said that your system was down...
|
|
|
|
|
Joined: May 2005
Posts: 141
Member
|
|
OP
Member
Joined: May 2005
Posts: 141 |
There were two different slots that had EDVIF written in pencil under 2 different slots, but no card is present. There is an extra phone which I have not looked at and I bet that is how they were doing it. If not, that is how they are going to do it now.
|
|
|
|
|
Joined: Oct 2006
Posts: 61
Member
|
|
Member
Joined: Oct 2006
Posts: 61 |
you can use a Viking PI-1 with an analog Station port for Ring over page. For Horn paging us a Trunk port. If you Send me an e-mail I can give you further information on how to connect to this device and Yes the worm is open again using an MKT phone for both.
Alone we can do so little; together we can do so much
|
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
116
guests, and
339
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
