|
|
|
|
Joined: Aug 2009
Posts: 1
Member
|
|
Member
Joined: Aug 2009
Posts: 1 |
I am having trouble with a direct access to integrated VMAC card in an Iwatsu Omega System. The Omega-voice Syustem Editor connects and will start to download a profile - but the connection gets hung up and I get an error message - that the connection dropped andd is restarting. I have tried restart conection - retry cycle and that does not ever end.. I have used the cat5 cable and res232 connector on the Phone side of the system and it works fine - same cord, connections etc. An suggestions on how to establish a rereliable connection to the system?
Training 101 - If it rings - answer it!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2006
Posts: 61
Member
|
|
Member
Joined: Oct 2006
Posts: 61 |
you need the special 9 pin connector PM for more information.
Alone we can do so little; together we can do so much
|
|
|
|
|
Joined: Aug 2006
Posts: 1,811 Likes: 15
Moderator-Iwatsu
|
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,811 Likes: 15 |
Try changing the settings in the connections tab to disable background transfers, and verify your port and speed settings. I've had some troubles in the past with the VMI programmer functioning smoothly if the ADIX programmer was still open. In my case it was probably a problem with the pc I was using, but it's easy to try.
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
Forums84
Topics94,512
Posts639,933
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
212
guests, and
35
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
