|
|
|
|
Joined: Oct 2010
Posts: 1
Member
|
|
Member
Joined: Oct 2010
Posts: 1 |
Hi all I am not very good with the IWATSU system at all, if anyone can help me I am trying to set an extension inside of our network to forward to a phone number outside our network. I really have no Idea how to do this, our company uses the IWATSU programmer to set all this up. Any help that can be explained as simple as possible is appreciated. Thanks a bunch
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2006
Posts: 1,812 Likes: 15
Moderator-Iwatsu
|
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,812 Likes: 15 |
Register the outside number you wish to call as a personal speed dial number at the extension you would like to forward:
Press FEAT + SPEED + 90 then dial the number to forward to. Press FEAT again when finished.
Set that extension to forward all calls to the appropriate speed dial bin number.
Press ICM + FWD + 14 + 90. The system will beep three times to acknowledge your entry. Press the SPKR key to finish.
TO cancel the forwarding, press ICM + FWD + * + 1.
Three beeps means you did it right. Press SPKR to finish.
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
|
Joined: Dec 2010
Posts: 12
Member
|
|
Member
Joined: Dec 2010
Posts: 12 |
On our IX-12KTD-3 phones, there is no "FWD" button. I'm guessing that means it's a soft button that would've had to been programmed during installation, right?
Is there any way to add it myself? I'm pretty good with small phone systems like this (ADIX).
|
|
|
|
|
Joined: Aug 2006
Posts: 1,812 Likes: 15
Moderator-Iwatsu
|
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,812 Likes: 15 |
If you have an ADIX system, there is no provision for end-user programming at the station level, so you'll need a vendor visit to add the buttons.
Call FWD is usually a default key on most patterns. Check the top row of your phone's programming, if it's a display phone, by pressing FEAT, #, 9 then pressing a button. The display will show how that button is programmed. You may have a FWD button, but just don't know it...
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
Forums84
Topics94,524
Posts640,007
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Professor Shadow),
191
guests, and
38
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
