|
|
Joined: Dec 2010
Posts: 12
Member
|
OP
Member
Joined: Dec 2010
Posts: 12 |
Our analog devices are not getting caller ID info; since our digital KT-3 phones correctly identify the calling party, I believe I can assume the information is being correctly transmitted down our PRI, and should be available to send to the SLT port, no? To test, I used a CallerID-capable SLT on a POTS/1FB line, and the information displays as expected.
Where in the programmer can I look to see why the analog machines (faxes, modems) are not displaying the information?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2006
Posts: 1,796 Likes: 10
Moderator-Iwatsu
|
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,796 Likes: 10 |
For Caller ID to be sent to an analog device, a few things have to be in place:
The analog ports are coming off an IX-8SUBS4 card installed in an ECS switch. Caller ID to analog devices isn't supported in earlier ADIX equipment, or from earlier version analog station cards.
In ECS programming, Stations>SLT, Caller ID has to be enabled to an analog port. By default, analog stations are set NO CID/Message Lamp. Set each port appropriate to your installation.
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
|
Joined: Dec 2010
Posts: 12
Member
|
|
OP
Member
Joined: Dec 2010
Posts: 12 |
I see from the programming guide that's in Class 10 item 61. Although the devices are off a 8SUBS4 card, the CoS jumps from item 59 to 71.
ECS s/v 1.21
JBean, I see from the programmer that item 61 appears somwhere between ver 1.5 and 3, but would you happen to know in which version it was first introduced?
|
|
|
|
|
Joined: Aug 2006
Posts: 1,796 Likes: 10
Moderator-Iwatsu
|
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,796 Likes: 10 |
ECS version 2.02 and above is required to pass CID info. Probably a good time to upgrade, since the current version is 8.0
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
|
Joined: Dec 2010
Posts: 12
Member
|
|
OP
Member
Joined: Dec 2010
Posts: 12 |
|
|
|
|
Forums84
Topics94,296
Posts638,846
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
174
guests, and
272
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
