|
|
Joined: Jul 2004
Posts: 36
Member
|
|
Member
Joined: Jul 2004
Posts: 36 |
Here's my problem. I have 2 NEC systems I'm trying to connect using Voip. I've done this several times so I'm fairly confident that the NEC systems are programmed right. I plugged the NICs on both sides directly into the smartjack of the DS1 circuits on both sides. No luck. I was told I dont need a router, but I'm wondering if I do. I d have IP addressing set up correctly, I've tried several cabling configs (e.g. crossover and straight through) and I've tried using my laptop instead of the IP cards. No luck. Any advice?
PS-I'm also going to post this in the NEC forum.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2003
Posts: 5,155 Likes: 5
Moderator-Vertical, Vodavi
|
|
Moderator-Vertical, Vodavi
Joined: Aug 2003
Posts: 5,155 Likes: 5 |
Yes, you need a router. The port on the smart jack is not ethernet.
|
|
|
|
|
Joined: Jul 2004
Posts: 36
Member
|
|
Member
Joined: Jul 2004
Posts: 36 |
Ok. What type of interface is it? I would guess that would be a question when I'm router shopping. Also, since I'm not routing between subnets, is there a less expensive "bridge" type device I could use instead?
|
|
|
|
|
Joined: Jan 2005
Posts: 826
Member
|
|
Member
Joined: Jan 2005
Posts: 826 |
Hello ncook,
The connection on the smartjack is a standard T-1, wired to RJ-48c specifications. Your ethernet patch cable fits the jack, but everything else about the connection is wrong.
You may be able to find a bridge with a T-1 interface. But, my guess is that you will be able to find a router for less money. Sure a router is more capable, but a bridge (with a T-1 interface) would be more specialized, and more expensive. Most routers that I have worked with can be configured as a bridge.
Good Luck!
|
|
|
|
|
Joined: Jul 2004
Posts: 36
Member
|
|
Member
Joined: Jul 2004
Posts: 36 |
|
|
|
|
|
Joined: Apr 2006
Posts: 6
Member
|
|
Member
Joined: Apr 2006
Posts: 6 |
To be just a bit more specific, if you are in a cisco world the interface you are looking for is a WIC-T1
|
|
|
|
|
Joined: Jul 2004
Posts: 36
Member
|
|
Member
Joined: Jul 2004
Posts: 36 |
Is there a need for a csu between the smartjack and router?
|
|
|
|
|
Joined: Jan 2005
Posts: 826
Member
|
|
Member
Joined: Jan 2005
Posts: 826 |
That depends on your routers interface. If you have a router with a serial interface, you would need a CSU/DSU. If you get a router with a T-1 interface it will likely have an intetgrated CSU/DSU. To use philpete's Cisco example, the appropriate part number would be WIC-1DSU-T1 (with integrated DSU). But, that is for the T-1 interface only (router not included).
I hope that helps!
|
|
|
|
|
Joined: Jul 2004
Posts: 36
Member
|
|
Member
Joined: Jul 2004
Posts: 36 |
It does. I'm making headway, talking to cdw. I'll let you guys know how it goes.
|
|
|
|
|
Joined: Jul 2004
Posts: 36
Member
|
|
Member
Joined: Jul 2004
Posts: 36 |
Problem was solved today, I hooked up my routers and after days of going back and forth with the telco, they finally fixed their problem and it works now. Thanks for all the help.
|
|
|
|
Forums84
Topics94,515
Posts639,950
Members49,847
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
257
guests, and
29
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
