|
|
Joined: Jul 2003
Posts: 1,132
Member
|
Member
Joined: Jul 2003
Posts: 1,132 |
Ed, You must be psychic.  I remember now on that move screw driver to the cover allowed access to mounting bolts.
|
|
|
|
|
Joined: Jul 2005
Posts: 860
Member
|
|
Member
Joined: Jul 2005
Posts: 860 |
Originally posted by djweis:
I'm not encouraging you to modify LEC facilties, but it's probably HDSL2 on the other side of the NIU. Take it off the pole, move it to the trailer, and use your other cable to extend the HDSL2 side, not the DSX-1 side.
Not that I've ever done that, but in case I get the urge I have a 4 slot mounting with the variations in HDSL4, HDSL2, and ADC HLXR cards "just in case". But... Eh... whuh.... HEY! I'm a Telco person and that's... That... that’s illegal! YOU CAN’T DO THAT!!!!!  Or I wouldn't encourag you to admit that!  I might have done that a time or two when I was a cable and data dude. 
-----------------------
Bryan
LEC Provisioning Engineer
Cars -n- Guitars Racin' (retired racer Oct.'07)
|
|
|
|
|
Joined: Nov 2006
Posts: 1
Member
|
|
Member
Joined: Nov 2006
Posts: 1 |
If you run 1500' of I.W., In effect that'll be a 3kFt loop from last repeater. Signal falloff will be at the ragged edge causing the customer intermittent erros, LOS, and a host of other signaling issues. Since they are at a construction trailer, the customer should get hold of the engineer and have 1.1 placed at the trailer that way they could get rid of the I.W.
|
|
|
|
Forums84
Topics93,832
Posts636,785
Members49,649
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Curlycord),
37
guests, and
26
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
