web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Sep 2006
Posts: 1
Member
Member
Offline
Joined: Sep 2006
Posts: 1
My Trillium Panther 612 KSU went out. There is a red light flikering on the side. Is this light suppose to be steady or is it okay if it's flickering that way? What else may be wrong if all the phones are completely dead? Please assist.

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: May 2003
Posts: 2,267
Member
Member
Joined: May 2003
Posts: 2,267
I am afraid that we tossed out our last Panther test cabinet over a year ago. Frankly I cannot remember exactly what the LED flickering means.
As for the phones being dead, the internal battery that holds the programming memory is surely long since dead, so if you lost power, all of your programming is gone. Unfortunately, if no one has replaced the battery, it also most likely means that battery acid leaked onto the circuit tracings under it and it is possible, even likely, that the system is not salvageable.
Do you have a a programming/install manual?
Have you tried powering it down for 10 minutes or so, then powering it back up?
If powering it down and then up does not bring it to life, it is probably time to replace the system completely with someone newer (best option) or to buy a refurbished KSU to replace it.
Those old beasts are certainly not worth repairing.

Joined: Mar 2001
Posts: 3,268
Member
Member
Joined: Mar 2001
Posts: 3,268
Here' from the Trillium Panther 612 manual Page D-5. Take a deep breath and:

1. Connect the KSU power cord to the surge
protector(It assumes you have one)at the AC
power outlet. The recessed STATUS indicator
goes ON --with a slight flicker--indicating
that the KSU is operative.
2. Set KSU switch 4 BATTERY to ON Use a paper
clip or small screw driver to set dip
switches. (This is the battery Paul144 talks
about.)
3. Set KSU switch 1 PROGRAM to ON
4. Push recessed RESET pushbutton once.
5. Set KSU switch 1 PROGRAM to OFF
6. Push recessed RESET button again. System is
set at the factory default settings.
7. At station 10 press the intercom key.

If all that hoo-hah doesn't make it come back to life--say good-bye and Press the INSTALLERS link for help in your area and/or the EQUIPMENT link at the top of this page for a newer system. Good Luck.


Link Copied to Clipboard
Newest Topics
how do the toshiba cix100 ip licenses work
by ringtone - 07/18/25 10:11 PM
IP Office 9.0
by hitechcomm - 07/18/25 12:52 PM
tempo lan toner 2
by davetel - 07/14/25 01:37 AM
Admin Program for XTS Systems
by EV607797 - 07/11/25 10:22 AM
Forum Statistics
Forums84
Topics94,567
Posts640,185
Members49,871
Most Online5,661
May 23rd, 2018
Newest Members
Mark Gee, LuigiE, FranzBos, Chuck Lowe, Ma Bell Brat
49,870 Registered Users
Top Posters(30 Days)
Toner 11
R4+Z 4
1A2 2
Who's Online Now
0 members (), 99 guests, and 74 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2025
Powered by UBB.threads™ PHP Forum Software 8.0.0