TS22 Battery Repair

Print Thread

Rate Thread

Page 1 of 2

TS22 Battery Repair #476130 04/05/10 11:15 AM
Joined: Mar 2005 Posts: 588 Tulsa, Oklahoma, USA tito1411 Moderator-Mobil Phones, Computers
tito1411 Moderator-Mobil Phones, Computers Joined: Mar 2005 Posts: 588 Tulsa, Oklahoma, USA	Ive replaced my TS22 internal lithium battery before and typically just soldered some new leads and placed the battery in the little compartment but this time I added a CR2032 holder which you can buy at Radio Shack for 99. cents. Now I can easily replace the battery in the future. https://www.radioshack.com/product/index.jsp?productId=3060977&CAWELAID=162165418#

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: TS22 Battery Repair #476131 04/05/10 12:03 PM
Joined: Jun 2003 Posts: 3,273 Likes: 1 Los Angeles, CA phonemeister Moderator-Toshiba
phonemeister Moderator-Toshiba Joined: Jun 2003 Posts: 3,273 Likes: 1 Los Angeles, CA	Great idea. I got a TS22 that needs fixing. Did you use silcone on the battery holder to keep in place?

Re: TS22 Battery Repair #476132 04/06/10 03:40 AM
Joined: Mar 2005 Posts: 588 Tulsa, Oklahoma, USA tito1411 Moderator-Mobil Phones, Computers
tito1411 Moderator-Mobil Phones, Computers Joined: Mar 2005 Posts: 588 Tulsa, Oklahoma, USA	used some hot glue and its holding great.

Re: TS22 Battery Repair #476133 04/07/10 05:41 AM
Joined: Mar 2010 Posts: 33 California phone repair Member
phone repair Member Joined: Mar 2010 Posts: 33 California	While your test set still apart, check also the speaker for any filings or metal debris... just a follow-up Telephone Equipment Repair

Re: TS22 Battery Repair #476134 04/07/10 08:55 AM
Joined: Dec 2007 Posts: 6,835 Likes: 26 Canby, Oregon Professor Shadow Retired Admin
Professor Shadow Retired Admin Joined: Dec 2007 Posts: 6,835 Likes: 26 Canby, Oregon	Ooooh! I bet you voided your warrenty! :toast: Dean Photographs: https://www.instagram.com/deanwilsoncanby/ https://fstoppers.com/profile/deanwilsoncanby https://www.facebook.com/Dean-Wilson-Photography-112841337020414 _________________________________________________________________________________________ Retired: That means I don't have a job description and I can do what I want.

Re: TS22 Battery Repair #476135 04/07/10 09:46 AM
Joined: Feb 2005 Posts: 12,354 Likes: 4 New York hbiss Member
hbiss Member Joined: Feb 2005 Posts: 12,354 Likes: 4 New York	Do the pins on that holder line up with the PC board holes? I know the battery had three pins, that has two that are in line. -Hal CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.

Re: TS22 Battery Repair #476136 04/07/10 10:16 AM
Joined: Feb 2005 Posts: 12,354 Likes: 4 New York hbiss Member
hbiss Member Joined: Feb 2005 Posts: 12,354 Likes: 4 New York	And hey Juliard, good you are here. Do you have any ideas about dealing with heavy conformal coatings like they use on those boards? I've been hacking and pulling away at it with an Xacto knife and dental pick to get it off the areas where the pads are. You have to be real careful not to damage any traces though. I know there is some stuff that is supposed to disolve it. I never tried it because I wonder if it will do anything with that heavy stuff or make a mess out of the board. -Hal CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.

Re: TS22 Battery Repair #476137 04/08/10 03:05 AM
Joined: Mar 2005 Posts: 588 Tulsa, Oklahoma, USA tito1411 Moderator-Mobil Phones, Computers
tito1411 Moderator-Mobil Phones, Computers Joined: Mar 2005 Posts: 588 Tulsa, Oklahoma, USA	No Hal, I didnt check the holes since I allready had my leads soldered on from last time I replaced the battery I just soldered those to the holder and glued it in place. Next person who replaces their battery may want to take a peek at that to see if the holder can mount directly to the PCB. That would make for a really clean install!

Re: TS22 Battery Repair #476138 04/08/10 03:29 AM
Joined: Feb 2005 Posts: 12,354 Likes: 4 New York hbiss Member
hbiss Member Joined: Feb 2005 Posts: 12,354 Likes: 4 New York	Yeah, I did check the holders out (the dimensions and pin spacing from the spec sheet). Didn't look like it could be inserted directly in the holes on the board so I never bothered to get one to play with it. Wish they made one with the same configuration as the battery with tabs. What you did is probably fine, but it does leave a large area where the board is not protected from moisture. Ideally I would want to re-coat the new battery and the area around it where the work was done with new conformal coating. But of course since this is for me I didn't because I would want to get at that battery later. -Hal CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.

Re: TS22 Battery Repair #476139 04/12/10 10:07 AM
Joined: Mar 2010 Posts: 33 California phone repair Member
phone repair Member Joined: Mar 2010 Posts: 33 California	Hal, I only use Exacto knife to remove the coating, yeah you need lot of patience and steady hand while working on it, Dont forget to use silicone glue after the mod. I've got a lot of success replacing these batteries and repairing speakers with bunch of metal filings on this test sets Telephone Equipment Repair

Page 1 of 2

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums Wiring - Telecom Carriers - Trunks & Services Telephone Repairs & Equipment TS22 Battery Repair