Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#480320 08/02/07 10:52 AM
Joined: Nov 2006
Posts: 63
Member
OP Offline
Member
Joined: Nov 2006
Posts: 63
Hey Guys,

Hoping you can help me out. Over the past year or so, we've noticed pages seem to be getting quieter and quieter. I'm looking at doing a couple different things if possible.

Here's my setup:
Comdial FX-II Phone System
AT&T PagePac 6 with Trunk Adapter (hooked up to a CO port on the phone system)

The page pac supplies most of the speakers throughout the building. But I also am tagged onto the CO port and have several valcom speakers hooked up. (CO Port to Valcom's Input ports, then a valcom power supply powering them).

Here's my questions thoughts:

1) We are probably getting ready to install a Valcom Stacking Feedback Eliminator (V-9964), having a little bit of feedback issues, but then I could turn the speaker volumes up more.

2) Question: Are there any devices that sense the incoming volume of the page (possibly hooked up to the CO Port somehow) and then adjust the volume accordingly, up or down depending on the need?

Any other suggestions to fixing this?

Thanks,
-David

Atcom VoIP Demo
VoIP Demo
#480321 08/04/07 05:55 PM
Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
*****
Offline
Moderator-Comdial
*****
Joined: Jan 2002
Posts: 2,328
Get rid of the pagepac and put in a bogen and use the the fx2 page port. The valcom is good choice. Lastly, you have some knowledge here but I think you need more experience involved here!

#480322 08/04/07 06:02 PM
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
*****
Offline
RIP Moderator-Nisuko-Tie, General
*****
Joined: Jan 2004
Posts: 6,648
if you contact valcom , and tell them your requirements they will suggest a solution

and yes there are devices that will adjust the volume to match noise level


Skip
------------------------------------

Serving SW and West central Fl since 1984
#480323 08/09/07 02:00 PM
Joined: Nov 2006
Posts: 63
Member
OP Offline
Member
Joined: Nov 2006
Posts: 63
Thanks guys for the help. Figured I would provide an update.

Feedback was a big problem, and I had used the Valcom Feedback Eliminator before, so I purchased one. Talked with Valcom about exactly how to hook it up and what they recommended. Hooked it up today, and the feedback eliminator solved my problems.

So now my setup is COPort->TrunkAdapter->FeedbackEliminator->PagePac.

Thanks for the help.

-David


Moderated by  metelcom 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,745
Posts636,435
Members49,622
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
cTopher, djmoutt, ffej010, Kenneth J McLean, telephonegunner, Tellink
Newest Members
noriod45, Levi1337, jackbeelerDCS, blentz, RockyTop
49,622 Registered Users
Top Posters(30 Days)
blentz 6
jsaad 5
Toner 5
dans 4
Who's Online Now
3 members (nameless, SamF, nortelvoip), 22 guests, and 14 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Business Phone Systems | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2022
Powered by UBB.threads™ PHP Forum Software 7.7.5