|
|
Joined: Jun 2005
Posts: 512
Member
|
|
Member
Joined: Jun 2005
Posts: 512 |
Folks,
I'm not experienced at all in paging and have been givin the responsiblity to add a couple of zones to a paging system.
We currently have a bogen amp and modules PCM-TIM and PCM-CPU. We currently have a trunk setup from our phone system to page the warehouse. But need to add nine speakers for the front office and use the same trunk to page the office and also page all (warehouse/office).
I assume I need a zone paging module, but how it all fits together is confusing.
I need a good web site that show how all the pieces fit.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2007
Posts: 5,059 Likes: 6
Moderator-1A2, Cabling
|
|
Moderator-1A2, Cabling
Joined: May 2007
Posts: 5,059 Likes: 6 |
PCM-TIM & PCM-CPU - ARE - Zone paging Modules. What size Amp do you have? Is this a 25/70 volt constant voltage system or are you using amplified speakers? How many speakers do you have now? Have you tried the Bogen Web site? ( www.bogen.com) Sam
"Where are we going and why are we in this hand basket?"
|
|
|
|
|
Joined: Jun 2005
Posts: 512
Member
|
|
Member
Joined: Jun 2005
Posts: 512 |
Its a 70 volt constant, from looking at Bogens site it shows that the TIM is the telephony and the CPU is the control and there is a multi zone mode that connects to the TIM and CPU via a ribbon cable.
In stead of running the audio thru the amp first and then to the modules and then thru the speakers or do I have to run thru the modules first and then thru the amp then to the speakers?
|
|
|
|
|
Joined: Feb 2005
Posts: 12,354 Likes: 4
Member
|
|
Member
Joined: Feb 2005
Posts: 12,354 Likes: 4 |
I need a good web site that show how all the pieces fit.
I have to laugh at how people think they can find anything on the web. How about looking at the installation materials on this from Bogen? It actually is available on their site.
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
|
Joined: Dec 2007
Posts: 908
Member
|
|
Member
Joined: Dec 2007
Posts: 908 |
Hal even better yet call bogen Tech Support tell them what you've got, what you want and they will walk you thru or even send you a fax diagrammed; we've done that a couple of times.
|
|
|
|
|
Joined: Feb 2005
Posts: 12,354 Likes: 4
Member
|
|
Member
Joined: Feb 2005
Posts: 12,354 Likes: 4 |
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
|
Joined: Jun 2005
Posts: 512
Member
|
|
Member
Joined: Jun 2005
Posts: 512 |
WOW tuff crowd. Basically I was asking for help, but apparently this boards help comes with Sarcasm and belittlement.
Thanks for the info guys and I will call Bogen Tech.
|
|
|
|
|
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
|
|
RIP Moderator-Nisuko-Tie, General
Joined: Jan 2004
Posts: 6,648 |
the advice to go the Bogen site is sound I was there this weekend , I usually work with Valcom but I have a job spec'ing Bogen they have some great info and downloads telephone paging systems a how to guide by Bogen
Skip
------------------------------------
Serving SW and West central Fl since 1984
|
|
|
|
|
Joined: Sep 2006
Posts: 372
Member
|
|
Member
Joined: Sep 2006
Posts: 372 |
I’ve had the same experience in the past as Jim B. I faxed a diagram of what I had and what I needed; they sent me a diagram and a parts list with the “Best†way to accomplish it.
JimmyV
"Well informed people know it is impossible to transmit the voice over wires. Even if it were, it would be of no practical value" Boston Post, 1865
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
WOW tuff crowd. Basically I was asking for help, but apparently this boards help comes with Sarcasm and belittlement. ------------------------------------------------- mgere, c'mon, you've been here long enough to know that. And develop a 'tough hide'.  John C.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
Forums84
Topics94,515
Posts639,961
Members49,847
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (RATHER BE FISHING),
205
guests, and
37
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
