Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#481893 11/12/09 12:22 PM
Joined: Jun 2007
Posts: 2,106
Kumba Offline OP
Member
OP Offline
Member
Joined: Jun 2007
Posts: 2,106
So I'm moving office buildings and the new space I'm moving into has no alarm panel. It did at one point but the company that moved out ripped it off the wall.

So, my alarm company has some deal going with an DSC wireless alarm system with a 39-mo agreement. My current office has a GE NetWorx N6-V2 with an 8-zone keypad. I will only need 5 zones in my new office (4 external doors, one motion detector) so the panel would work.

What are your thoughts? I'm really not that into the idea of wireless detectors. I can just see a battery getting low or someone firing up a cell phone and all heck breaking loose.

Atcom VoIP Demo
VoIP Demo
Joined: Apr 2006
Posts: 2,039
Member
Offline
Member
Joined: Apr 2006
Posts: 2,039
I wouldn't shy away from the wireless equipment if that's the best way to go. But as always hardwired is the best way to go if you can.

What about the cables that were left when the previous tenant removed their panel? Do they appear to be intact and in good shape?
Maybe your security company can install a panel using those cables.

Joined: Jun 2007
Posts: 2,106
Kumba Offline OP
Member
OP Offline
Member
Joined: Jun 2007
Posts: 2,106
I didn't look at them well enough when I was there. We're going to get access to the space in December to get these things done so I will check it out fully then.

Just not sure I trust wireless. Probably just either buy new or move old. Are the wireless panels really worth messing with? Keep in mind that I need this security system to work for insurance reasons. I'd be incredibly upset if my insurance company weaseled out on my because it wasn't hard-wired.

Joined: Dec 2005
Posts: 2,928
Member
Offline
Member
Joined: Dec 2005
Posts: 2,928
James wireless is fine, honeywell even offers UL listed wireless devices. I always hardwire when ever I can, but would not think twice about useing a wireless device, the devices warn you when the batteries are going low (msg at the keypad). I am not as familier with DSC but have heard good things about them.


I Swear I did not touch anything bash
Joined: Apr 2006
Posts: 2,039
Member
Offline
Member
Joined: Apr 2006
Posts: 2,039
Quote
Originally posted by Kumba:
Keep in mind that I need this security system to work for insurance reasons.
In that case get the insurance company to provide you with their requirements in writing and provide them to your security systems company.

In most cases it's not too difficult to meet the requirements as long as the system is installed by a certified security systems company and monitored by a certified monitoring center.

Joined: Jun 2007
Posts: 2,106
Kumba Offline OP
Member
OP Offline
Member
Joined: Jun 2007
Posts: 2,106
Their only requirement is that we give them a certificate of security monitoring from our alarm company. Basically that we have monitoring and that the alarm company is licensed/bonded/insured/etc.

Joined: Apr 2006
Posts: 2,039
Member
Offline
Member
Joined: Apr 2006
Posts: 2,039
:thumb:


Moderated by  metelcom 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,881
Posts637,017
Members49,673
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
ArturAIM, Crowtalks, gfcor, scottvin
Newest Members
APInc, m1cashman, jonnycom, XJR9000, BitBang
49,673 Registered Users
Top Posters(30 Days)
Toner 14
jsaad 8
teleco 6
dexman 5
Shahza 4
Who's Online Now
0 members (), 57 guests, and 14 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Business Phone Systems | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2023
Powered by UBB.threads™ PHP Forum Software 7.7.5