|
|
Joined: Jun 2008
Posts: 10
Member
|
OP
Member
Joined: Jun 2008
Posts: 10 |
Hi i´m looking for the schematics for a bogen TPU100B We need to repair it. The problem is that when we turn in on, it works well, but after 10 or 15 minutes it starts to give intermittent sound. any ideas thanks
VB
|
|
|
|
Joined: Jan 2007
Posts: 1,942 Likes: 2
Member
|
Member
Joined: Jan 2007
Posts: 1,942 Likes: 2 |
I have one for a TU100A, which is similar except for the Aphex exciter circuitry. However that piece and the ALC is shown in Bogen's TPU-15A public manual.
But before you take anything apart, take some simple steps like turning off the Aphex and potting the Music Mute fully clockwise. Make sure your inputs aren't cranked all the way up and set the ALC about halfway for starters. There is a little art to tuning power amplifiers and I find most don't know how to do it. I believe the basic steps are either covered in their TPU100 and TPU250 manuals, but if not I'm sure you can find them on Bogen's website.
Now if you would rather attempt repair yourself (instead of Bogen, which I recommend) you might look at one of the six power transistors along the black heat sink that divides the circuit board. But check the action of the fan and thermostat first; I'll bet you had a failure there first.
"Carry others as you climb" -- Tim Alberstein
|
|
|
|
Joined: Dec 2005
Posts: 36
Member
|
Member
Joined: Dec 2005
Posts: 36 |
Hey dagwoodsystems, I would like to have a copy of that manual also. I also have a 100b that needs service. Billy Correll [email protected]
|
|
|
Forums84
Topics93,877
Posts636,993
Members49,670
|
Most Online5,661 May 23rd, 2018
|
|
1 members (pvj),
146
guests, and
11
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|