|
|
Joined: Nov 2006
Posts: 179
Member
|
|
Member
Joined: Nov 2006
Posts: 179 |
Just installed a new valcom paging system in a school. We are using a V-2924A with a V-2925 Expansion unit. All wiring is new and each speaker in wired individually except for the common areas (Hallways, lunchroom, etc.) Pages work fine but we get a constant hum on the speakers. It appears to be a power problem-if we disconnect the talk pair the hum persists. Anyone have any ideas?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2005
Posts: 9,289 Likes: 15
Admin
|
|
Admin
Joined: Sep 2005
Posts: 9,289 Likes: 15 |
Are you using a common power supply or separate transformers? It sounds like you have a ground loop being caused by to many grounds.
|
|
|
|
|
Joined: Nov 2006
Posts: 179
Member
|
|
Member
Joined: Nov 2006
Posts: 179 |
We are using a single VP-4124 at one site and 2 VP4124 at another site and we have identical problems at each.
|
|
|
|
|
Joined: May 2002
Posts: 17,745 Likes: 37
Member
|
|
Member
Joined: May 2002
Posts: 17,745 Likes: 37 |
Miswired? How high do you have the volume turned up?
Retired phone dude
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Possibly the common wire for the speech path is bare and touching building steel or conduit. Try disconnecting all speaker runs at the Valcom and reconnecting one at a time. This will backfeed to ALL speech paths! And please don't tell us you used 'signal cable', doorbell wire, or some other type of non-telco wire, rather than cat3.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Dec 2002
Posts: 9,429 Likes: 3
Member
|
|
Member
Joined: Dec 2002
Posts: 9,429 Likes: 3 |
I'd call Valcom and see what they have to recommend. I was at a training seminar today and their support is really top notch.
Jeff Moss
Moss Communications
Computer Repair-Networking-Cabling
MBSWWYPBX, JGAE
|
|
|
|
|
Joined: Nov 2006
Posts: 179
Member
|
|
Member
Joined: Nov 2006
Posts: 179 |
All runs are Cat 3 and the volume is turned almost all the way down.
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Doesn't the 2924 have a BGM function? If you are not using BGM, turn it off AND short the the input.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
Forums84
Topics94,520
Posts639,992
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
159
guests, and
51
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
