|
|
Joined: Apr 2005
Posts: 69
Member
|
OP
Member
Joined: Apr 2005
Posts: 69 |
Any luck with name and number caller ID with a PRI. If so what line vendor and protocols are being used? :scratch:
It is better to have and not need, than to need and not have!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2002
Posts: 1,101
Member
|
|
Member
Joined: Apr 2002
Posts: 1,101 |
Just number.
With 3.0 software you are suppose to get name and number, but I have not seen it work.
Good Luck!!
If all else fails, use a BFH.
|
|
|
|
|
Joined: Jan 2006
Posts: 351
Member
|
|
Member
Joined: Jan 2006
Posts: 351 |
If you can read this, you're in range.
|
|
|
|
|
Joined: Jul 2004
Posts: 291
Member
|
|
Member
Joined: Jul 2004
Posts: 291 |
I have name and number working here.3.0 eclipse and 1.3 pri firmware.Works fine
|
|
|
|
|
Joined: Jan 2006
Posts: 351
Member
|
|
Member
Joined: Jan 2006
Posts: 351 |
Frank, how are you having that delivered?
I mean, what switch type are you set to use in the ctrl-c q screen?
and who is the provider? I'll switch my clients...
Tyler
If you can read this, you're in range.
|
|
|
|
|
Joined: Mar 2007
Posts: 12
Member
|
|
Member
Joined: Mar 2007
Posts: 12 |
Provider must supply NI2 protocal for Name and Number delivery. System must be set for it also.
Jason Doane
Owner
Tele-Consultants LLC
Cell 904.710.4418
office:904.261.6150
|
|
|
|
|
Joined: Dec 2005
Posts: 2,928
Member
|
|
Member
Joined: Dec 2005
Posts: 2,928 |
You can get name and number using NI2...if your system supports it. It is often charged by the channel so it can get rather $$$.
I Swear I did not touch anything 
|
|
|
|
|
Joined: Mar 2007
Posts: 12
Member
|
|
Member
Joined: Mar 2007
Posts: 12 |
In your area, I believe Paetec would support it as a carrier. US Lec does down here and they just merged. Anthonyh is correct, your system must be able to support it. Although I have never heard of it being charged per channel, usually it is a flat charge to enable it. I believe it is a per license charge to the carrierso the per channel charge would make sense.
Jason Doane
Owner
Tele-Consultants LLC
Cell 904.710.4418
office:904.261.6150
|
|
|
|
Forums84
Topics94,296
Posts638,846
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
