|
|
|
|
Joined: Oct 2006
Posts: 10
Member
|
|
Member
Joined: Oct 2006
Posts: 10 |
I will give these ideas a try Thanks.
|
|
|
|
|
Joined: Oct 2006
Posts: 10
Member
|
|
Member
Joined: Oct 2006
Posts: 10 |
This answer is >>>>>>>>>> (drum roll please)
The STDB of the SLT card, using db0, had a wrong value in the MIN_HKFLS setting. It was so wrong that the MIN value was higher then the MAX value ! I made the corrections, in my case down to 200 for the MIN HKFLS and 780 for the MAX HKFLS. It was 1740! The previous owner must of not wanted anybody to hookflash on a SLT POT.
Thank you everyone for your help. The transfer function is now working as it should.
|
|
|
|
Forums84
Topics94,551
Posts640,100
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
1,549
guests, and
20
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
