|
|
|
|
Joined: Dec 2008
Posts: 280
Member
|
|
Member
Joined: Dec 2008
Posts: 280 |
Customer has new PRI installed. System 2.5.0, PRI 1.2, software. Using Senderized Digit Options as they do not have LCR.
Issue is when they call out to an auto attendant the dial pad is disabled until they dial ##. LCR Centrex option is set to Y so system will not start dialing after 7 digits when calling a area code without 1 or 0 as middle digit. (Normal). Have tried several things and believe this is software issue. All debugs turned on no help. Any thoughts?
mjc
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2005
Posts: 828
Member
|
|
Member
Joined: Nov 2005
Posts: 828 |
I'd find a set of ECL3.0 software and see if that fixes it. I've had customers with PRI using senderized digits and don't remember this trouble. However, they were likely on 3.0. Good luck!
Mike
|
|
|
|
|
Joined: Dec 2008
Posts: 280
Member
|
|
Member
Joined: Dec 2008
Posts: 280 |
mforrence. That is my thoughts as well. Going to try 2.5.1 as the person doing the install has that handy. I advised him I think it's software related as well as I have tried every trick I know to get the issue resolved. But don't have a list of software bugs that were in 2.5.0
mjc
|
|
|
|
|
Joined: Dec 2008
Posts: 280
Member
|
|
Member
Joined: Dec 2008
Posts: 280 |
Results: It was not software bug 3.0 didn't correct. Issue was with T1 type setting which isn't suppose to have anything to do with PRI and it's even low lighted in the System programming screen.
Found last 11 channels were set to DA1 once changed to Tie it corrected issue. Go figure?
mjc
|
|
|
|
|
Joined: Jul 2011
Posts: 2
Member
|
|
Member
Joined: Jul 2011
Posts: 2 |
I am installing a new pri into ids 228 what are the program I need to install PARI
aloha
|
|
|
|
|
Joined: Jul 2011
Posts: 2
Member
|
|
Member
Joined: Jul 2011
Posts: 2 |
SORRY ITS SHOULD ME pri not pari
aloha
|
|
|
|
|
Joined: Nov 2005
Posts: 828
Member
|
|
Member
Joined: Nov 2005
Posts: 828 |
dkniheu - you would be best to start a new thread for this. You may want to also ask a more specific question. If you're starting with no knowledge of the product, you'd be well served by finding a local tech to assist as there are many things that must happen to make a new PRI function. Good luck
Mike
|
|
|
|
|
Joined: Nov 2004
Posts: 194
Member
|
|
Member
Joined: Nov 2004
Posts: 194 |
mc601. the type is blanked out or dim, it does not function on PRI. so I am not sure if this was your issue. I have at leat 100 PRI circuits running out there. Did you set the debug code for PRI?
Let me know how that is working out.
Executone super tech.
|
|
|
|
|
Joined: Dec 2008
Posts: 280
Member
|
|
Member
Joined: Dec 2008
Posts: 280 |
See note from 7/9 that is what fixed issue. And yes that is blanked out and suppose to not have effect but it does?
mjc
|
|
|
|
Forums84
Topics94,518
Posts639,976
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
286
guests, and
41
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
