|
Joined: Aug 2005
Posts: 908
Member
|
OP
Member
Joined: Aug 2005
Posts: 908 |
I need to redirect inbound calls from a T1 to SIP trunks. I've created routing from the Call Routing Table to 9200. This compares the dialing pattern in a Route Group which sends the call to a Facility Group. The Facility Group connects the call to the SIP Trunk Group. However, it just generates a dial tone. It does not forward the call. The Dial Rules for the Facility Group are Echo Equal Access, Echo Toll Field, Echo 3 digits After Toll Field, Echo Local Address and Add #. How can I get the call to forward and not just stall at the SIP trunks?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics93,968
Posts637,416
Members49,704
|
Most Online5,661 May 23rd, 2018
|
|
|
|