|
|
|
|
Joined: Oct 2009
Posts: 57
Member
|
|
Member
Joined: Oct 2009
Posts: 57 |
Just replaced an old Toshiba system in the med clinic with a CIX100 with expansion cabinet. The old system and the hospital were tied together through our office by using analog ports on one system backfed through our office and then plugged into CO ports on the other system. 2 from the clinic and 3 from the hospital. Each site would then use CO access codes to get intercom dial tone from the other system and then direct dial stations at the other location. When we get done with the fiber project we are in the middle of this will change but for right now we are keeping it as is. Last night the hospital called and said they are unable to direct dial the clinic. This had worked since last Wednesday. I would like to put an R48S on the RSTU at the clinic. Are there any programming settings on the new CIX100 that need to be changed? Thanks for the help.
Last edited by Duane F.; 08/28/12 08:58 AM.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
No programming change is required to add the R48S. But you might be looking at a disconnect signaling issue which can prevent the CO ports from releasing the call.
|
|
|
|
|
Joined: Oct 2009
Posts: 57
Member
|
|
Member
Joined: Oct 2009
Posts: 57 |
Thanks for the help. Got it working again.
|
|
|
|
Forums84
Topics94,551
Posts640,099
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
198
guests, and
19
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
