web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Apr 2012
Posts: 12
jakusb Offline OP
Member
OP Offline
Member
Joined: Apr 2012
Posts: 12
We have an old DCS v4.2 telephone system.
Currently we have assigned most of the phones a direct phone number so they can be called directly from outside. However when they call out themselfs, the central number is being displayed at the receiver end. Is it possible to configure it to display the direct number?

many thanks in advance!

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Mar 2012
Posts: 140
Member
Offline
Member
Joined: Mar 2012
Posts: 140
You have to setup CO+EXTENSION in one of the MMC (somewhere on 300 or 400??, I can't remember which MMC this is. I can find it for you till monday.

Joined: Mar 2001
Posts: 3,869
Member
****
Offline
Member
****
Joined: Mar 2001
Posts: 3,869
You have a T-1 card or E-1 card, DID cards, this is a three cabinet type DCS or what as you may have different equipment overseas that we have here.


THE Bracha, old blond specialist in Rube Goldberg solutions.
Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
I always set to DID tel no in mmc312.
You will also need to get your provider to enable ext level cli and/or extension level billing

Joined: Apr 2012
Posts: 12
jakusb Offline OP
Member
OP Offline
Member
Joined: Apr 2012
Posts: 12
Thanks for all the replies!
I checked en noticed that CLIP send is on for all stations, but still the central number is being displayed on outside receiving phones.
Does this require configuration by line provider?
We have 8 outside lines (4xISDN) with 2 numberblocks (total 20 numbers).
Wish is to have the stations (one of the 20) own direct number being displayed when calling out, instead of central number.

Joined: Jul 2006
Posts: 93
Member
Offline
Member
Joined: Jul 2006
Posts: 93
I don't think it's possible on a system that old - looking at the old Combined Programming Manual v3 (for DCS, DCS Compact, DCS Compact II, DCS-816, DCS-408, iDCS100 and iDCS500, circa 2003) MMC323 SEND CLIP NUMBER states "iDCS systems only"

This has become CALLING PARTY NUMBER on OS7000 systems.

Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
In the CLIP send/receive MMC keep going past CLI send and CLI receive and you will find a setting where you can change from co number to DID tel no for all stations.

Note that if a station has 2 indial numbers assigned it will show the one that appears first in the indial table


Moderated by  nameless, pvj 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,100 Shoretel
187,712 CTX100 install
186,800 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
0 members (), 140 guests, and 24 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5