|
|
|
|
Joined: Sep 2012
Posts: 11
Member
|
|
Member
Joined: Sep 2012
Posts: 11 |
Is there some way to make sure the time in Date & Time is always correct? I go in and set it and then it drifts off. I do have "Automatic Time Adjustment" set to Enabled, but it must not be getting the network time.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
|
Member
Joined: May 2003
Posts: 2,924 |
Time is set by ISDN or CID. It could be turned off or Carrier sending bad info.
|
|
|
|
|
Joined: Jun 2012
Posts: 61
Member
|
|
Member
Joined: Jun 2012
Posts: 61 |
I don't know how you are setting the time.But on your system menu,go to prgm.2.1 (System > Date & Time/Daylight Saving > Date & Time Setting (T).Set the time
Then under System in Daylight Saving Time, disable.
If you are onsite and not doing it remotely, try to run the hours setting to past the one set round then back.It should solve it.I had the same problem previously.
|
|
|
|
|
Joined: Sep 2012
Posts: 11
Member
|
|
Member
Joined: Sep 2012
Posts: 11 |
brokeda: CID not turned off. We can see CIDs coming through. I'll check with Carrier. Thanks!
Otoni79: Yes, that is where I am setting it. Daylight Savings time is enabled. Ill try disabling. If that doesn't work, I'll try your suggestion. Thanks!
|
|
|
|
Forums84
Topics94,526
Posts640,016
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
146
guests, and
46
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
