web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Joined: Oct 2005
Posts: 44
Member
Member
Offline
Joined: Oct 2005
Posts: 44
My curiousity just made me walk back and look at the ground setup for the cabinet. A 10 guage ground wire on the cabinet is joined up with about 3 other 12 guage ground wires. These grounds all then run on a single 10 guage wire up into the ceiling to who-knows-where.

I'll try a ground test on Monday.


Richmond Virginia Computer Consulting Services
www.RichmondComputerHelp.com
Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Oct 2005
Posts: 44
Member
Member
Offline
Joined: Oct 2005
Posts: 44
Inter-tel called me this morning and I chatted with the tech about the echo issue. I mentioned all the troubleshooting steps I've taken so far.

Tomorrow he's going to come by with a SLC card and a LSC card and we are going to swap those two cards out one by one and see if the echo goes away.

If that doesn't work then I'll try the ground test.


Richmond Virginia Computer Consulting Services
www.RichmondComputerHelp.com
Joined: Sep 2005
Posts: 840
Member
Member
Joined: Sep 2005
Posts: 840
Kaefer, go to trunk programming on the Axxess. System>Devices and Feature Codes>Trunks. Change the Hybrid Balance setting to 'Short' on all trunks. Test w/ that setting. If that doesn't help, make sure you set that back on all trunks.

Joined: Aug 2005
Posts: 6,692
Member
Member
Offline
Joined: Aug 2005
Posts: 6,692
Quote
Originally posted by superfoneguy:
Kaefer, go to trunk programming on the Axxess. System>Devices and Feature Codes>Trunks. Change the Hybrid Balance setting to 'Short' on all trunks. Test w/ that setting. If that doesn't help, make sure you set that back on all trunks.
Isn't the Hybrid Balance setting at that location only relevant to T1s?

Joined: Sep 2005
Posts: 840
Member
Member
Joined: Sep 2005
Posts: 840
Noooo. If you ever fire up VOIP sets w/ analog service, you need to adjust the hybrid balance setting to 'Short' to help alleviate echo. The 'Normal' setting will give you fits. I'm not sure this will fix the problem in this thread, but it's easy to change and probably worth trying.

Joined: Aug 2005
Posts: 6,692
Member
Member
Offline
Joined: Aug 2005
Posts: 6,692
Good to know. Thanks!

Joined: Oct 2005
Posts: 44
Member
Member
Offline
Joined: Oct 2005
Posts: 44
Quote
Originally posted by superfoneguy:
Kaefer, go to trunk programming on the Axxess. System>Devices and Feature Codes>Trunks. Change the Hybrid Balance setting to 'Short' on all trunks. Test w/ that setting. If that doesn't help, make sure you set that back on all trunks.
<FONT SIZE=7>WooHoo!!!!!</FONT>

THANK YOU SOOOOOOO MUCH! I changed the setting from 'Normal' to 'Short' on the trunk these phones are attached to and the echo disappeared. Then I switched it back to 'Normal' while I was on the phone and the echo came back. The Hybrid Balance setting change was the fix!

I owe you guys. Thanks again.
-Kaefer
Now I need to figure out what to do about voicemail and the upgrade to V9.0 for caller id on the SLC card.


Richmond Virginia Computer Consulting Services
www.RichmondComputerHelp.com
Joined: Oct 2005
Posts: 44
Member
Member
Offline
Joined: Oct 2005
Posts: 44
Oh yeah, is there anything I need to know about this Hybrid Balance setting?

Should I expect that this setting may negatively affect all the rest of the phones we have, mainly Inter-tel digital desk phones?

-Kaefer


Richmond Virginia Computer Consulting Services
www.RichmondComputerHelp.com
Joined: Sep 2005
Posts: 840
Member
Member
Joined: Sep 2005
Posts: 840
I have never had it effect anything negatively. The hybrid balance setting really just tweaks the impedance setting for that incoming trunk. If test calls on the digital fones work fine and you can fax and modem call fine, then you should be in like Flynn...

Page 2 of 2 1 2

Moderated by  Stix1 

Link Copied to Clipboard
Newest Topics
NEC sv9300 web interface
by SamF - 06/19/25 11:56 PM
KX-NS700 Firmware Jump
by Zach8789 - 06/16/25 09:39 PM
Transferring Entire Contents
by EV607797 - 06/16/25 03:53 PM
Reviving an Ernest D3 payphone, Telelink, LCD
by mcgyver - 06/14/25 12:43 PM
Forum Statistics
Forums84
Topics94,553
Posts640,115
Members49,861
Most Online5,661
May 23rd, 2018
Newest Members
Zach8789, tectrolink, mcgyver, gary moore, telli
49,861 Registered Users
Top Posters(30 Days)
Toner 6
Who's Online Now
0 members (), 31 guests, and 63 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2025
Powered by UBB.threads™ PHP Forum Software 8.0.0