|
|
Joined: Apr 2012
Posts: 12
Member
|
OP
Member
Joined: Apr 2012
Posts: 12 |
Is there a way to connect a laptop directly to the Terminal port to admin the switch. 3Gsi switch.
Robert
|
|
|
|
|
Joined: Sep 2005
Posts: 898
RIP Moderator-General
|
|
RIP Moderator-General
Joined: Sep 2005
Posts: 898 |
Robert...
You can do it..it's a PITA, you need a 355 adapter, D8W cord and the correct adapter for your laptop and have to run DSA or ASA in term mode..set it up for "direct serial port connection"
Easier to just run ASA and use the "inads" port from an ext in the switchroom;
...bob...
Bob Wells
WellComm, Inc.
"As long as nobody's dead or in jail, it can't be all that bad ! "
|
|
|
|
|
Joined: Apr 2012
Posts: 12
Member
|
|
OP
Member
Joined: Apr 2012
Posts: 12 |
Thanks Bob,
The problem is that all of the wires have been pulled and there is no record of the ext number to port. So I have no way of connecting to the INADS port without an extension number or pots line.
You are right about the terminal connection, it is a PITA!
Robert
Robert
|
|
|
|
|
Joined: May 2002
Posts: 4,298 Likes: 7
Moderator-Avaya, Polycom
|
|
Moderator-Avaya, Polycom
Joined: May 2002
Posts: 4,298 Likes: 7 |
Connect a modem to the inads port and put a dial tone to it.
|
|
|
|
|
Joined: Sep 2005
Posts: 898
RIP Moderator-General
|
|
RIP Moderator-General
Joined: Sep 2005
Posts: 898 |
Bob Wells
WellComm, Inc.
"As long as nobody's dead or in jail, it can't be all that bad ! "
|
|
|
|
|
Joined: Sep 2006
Posts: 204
Member
|
|
Member
Joined: Sep 2006
Posts: 204 |
I do it with a USB to 9 pin Serial adapter out of laptop and a 9 pin to 25 pin cable. Works fine
|
|
|
|
Forums84
Topics94,294
Posts638,833
Members49,768
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
118
guests, and
369
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
