|
|
Joined: Nov 2005
Posts: 84
Member
|
|
Member
Joined: Nov 2005
Posts: 84 |
Hello all, I seem to be having a problem assigning slot 105 from an RCIU/RCIS back to not assigned on our CTX 670. It pops up with an error code 49, and a long winded explanation of things not to do when changing PCBs. There's no programming remaining that I can see referencing the RCIU. I tried rebooting, but not power cycling - is that the missing step? I generally shy away from full power cycles, as it sends the outbuilding alarms into a loud frenzy.
Thanks!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
You have to "unmarry" them from the RCOU/S that references the RCIU/S that you want to remove. Check the caller-id tab in trunk assignments.
|
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
Did you do a maintenance data save and go back and look at card assignment?
If you've assigned the car to none, and done a backup and it is still giving an error, then you may have to power cycle, don't know any other method of bringing it up clean when it decides it doesn't like something.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
|
Joined: Nov 2005
Posts: 84
Member
|
|
Member
Joined: Nov 2005
Posts: 84 |
You have to "unmarry" them from the RCOU/S that references the RCIU/S that you want to remove. Check the caller-id tab in trunk assignments. I quadruple checked the trunk assignments. I actually moved the RCIU/RCIS card to the second cabinet when I added the RCIS (after I added up all the power factors,) so any references under trunk assignment have been pointed to the card's new location. Did you do a maintenance data save and go back and look at card assignment?
If you've assigned the car to none, and done a backup and it is still giving an error, then you may have to power cycle, don't know any other method of bringing it up clean when it decides it doesn't like something. I'll try the backup tomorrow, and see what I can find out.
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
Did you try assinging the slot 105 as a "No assignment"?
|
|
|
|
|
Joined: Nov 2005
Posts: 84
Member
|
|
Member
Joined: Nov 2005
Posts: 84 |
Did you try assinging the slot 105 as a "No assignment"? I did! No luck that way either.
|
|
|
|
Forums84
Topics94,514
Posts639,941
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
174
guests, and
25
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
