Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#543034 01/09/13 02:44 PM
Joined: Nov 2006
Posts: 7
Member
OP Offline
Member
Joined: Nov 2006
Posts: 7
OK, I swapped out a triad sts yesterday, Actually used the manual to program. Got everything except:

Line 5 and 6 have no dialtone - (did the usual testing -took co 4 put it on 5 zilch and 5 to 4 good)but I have a feeling it is in card config?
DSS Console (x123) is paired to x100 but i can't seem to program buttons. Are these buttons 25 and on off of the 24 button phone 9100) or do i program the buttons on 123? So confused.
Any help would rock!
Thanks
Starbuck

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Starbuck #543035 01/09/13 02:52 PM
Joined: Jan 2005
Posts: 15,355
Likes: 12
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Offline
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Joined: Jan 2005
Posts: 15,355
Likes: 12
There's no such thing as a "Triad STS", but I'm assuming that you have a standard STS. As for lines 5/6 not working, did you assign the card slot in flash 24 to support an additional LCI4 card and then reboot the system?

As for the programming of the DSS buttons, you would do this in flash 50, page B, button 11 for station 123. DSS map #2 should have given you all of the extensions appearing though, so there shouldn't be much programming required.


Ed Vaughn, MBSWWYPBX
Starbuck #543036 01/09/13 02:59 PM
Joined: Nov 2006
Posts: 7
Member
OP Offline
Member
Joined: Nov 2006
Posts: 7
Thanks ED...yes, it is a STS and as to assigning the card slot in flash 24, I thought I did. I configured my cards per the instruction (put switch 8 in the different position) and rebooted. When I hit the line, it comes up, just doesn't give me dial tone.

As to the DSS, I thought I did do the buttons for 123 using flash 50 page b btn 11. DSS map? Huh?

I will go back there and try again today.

Thanks,
Jim



Starbuck #543041 01/09/13 03:28 PM
Joined: Jan 2005
Posts: 15,355
Likes: 12
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Offline
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Joined: Jan 2005
Posts: 15,355
Likes: 12
I wonder if your LCI4 card is in the correct slot? It should be in the one farthest to the right. People often think that the cards go from left to right, but they go the opposite in the STS.

The DSS map is defined in flash 50, page B, button 1. If you entered 2100 as the station type, it would be map 2, paired with extension 100. Map 2 has extensions 100-147 appearing on buttons 1-48.


Ed Vaughn, MBSWWYPBX
Starbuck #543061 01/09/13 06:41 PM
Joined: Oct 2004
Posts: 1,486
Member
*****
Offline
Member
*****
Joined: Oct 2004
Posts: 1,486
If you configured the card and switched dip switch 8 it would initialize the system so that might be the problem. You config your the card and then do a simple reset you do not need to change dip switch 8 to program any cards in it.

and Ed is right on about the DSS mapping.

Starbuck #543131 01/10/13 02:20 PM
Joined: Feb 2009
Posts: 3,136
Moderator-Vodavi, Vertical, XBlue
*****
Offline
Moderator-Vodavi, Vertical, XBlue
*****
Joined: Feb 2009
Posts: 3,136
Reinitializing the system means that you get to start all over again from scratch!


- Dave S. -

You can never appease your ideologue opponents.

Starbuck #543170 01/10/13 09:41 PM
Joined: Mar 2008
Posts: 457
Member
Offline
Member
Joined: Mar 2008
Posts: 457
Agreed; I'd make sure the system is holding its database and then try frogging the LCOB cards to make sure the second one works.

I'll bet a replacement hookswitch it's something fairly simple. smile


"There is one thing and only one thing in which it is granted to you to be free in life, all else being beyond your power: that is to recognize and profess the truth." - Leo Tolstoy

Moderated by  EV607797, JWRacedog, MnDave, nfcphoneman 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,964
Posts637,402
Members49,703
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
cquillmann, genart1, OukoTech, p2ii, roundaboutrc, Shane Bohannan, techhelp, WTWC40
Newest Members
Acme Finishing, jim gray III, Merenth, Service Tech 911, Stephen A
49,703 Registered Users
Top Posters(30 Days)
Toner 11
vvbasti 10
jsaad 6
Who's Online Now
0 members (), 17 guests, and 36 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2023
Powered by UBB.threads™ PHP Forum Software 7.7.5