|
|
|
|
Joined: Nov 2006
Posts: 264
Member
|
OP
Member
Joined: Nov 2006
Posts: 264 |
I have sv8300 configured as follows:
software version R7.
single cpu
equpped with 24 LCs,8 COs, 16 DLCs.
problem is:
all analog extensions can not make calls, they can hear dial tone but the dialed numbers do not go, dial tone does not stop after dialing the first digit
... after making 30 to 40 calls the problem strikes again it last for few minutes and start working... and so on !!!
any comments?
Last edited by Lee07; 02/13/13 08:00 AM.
Lee
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2007
Posts: 1,439
Member
|
|
Member
Joined: Apr 2007
Posts: 1,439 |
Sounds like your built in DTMF receivers on the cpu are not configured to handle the amount of traffic coming from your analog stations.
D
|
|
|
|
|
Joined: Nov 2006
Posts: 264
Member
|
|
OP
Member
Joined: Nov 2006
Posts: 264 |
Thank you for your reply.
to do that,I set cmd 42>183 to 8 calls.
Any more settings needed for DTMF configration???
Last edited by Lee07; 02/13/13 11:34 PM.
Lee
|
|
|
|
|
Joined: Nov 2006
Posts: 264
Member
|
|
OP
Member
Joined: Nov 2006
Posts: 264 |
more observations on the above issue shows that 32 calls can be completed and then 12 attempts will fail and so on....
calls made by Dterms are not affected and go very well!!!
Lee
|
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
138
guests, and
366
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
