sundance-communications.com/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems Muliple Gateways ?

Hi, I am about to install Gamma Assured SIP trunks on a 7030, which in itself is ok as I can give the system its LAN ip settings and Public ip. The router is a Cisco managed router from Gamma(voice only over their private network), so this means I will have no remote access for programming. The site also has a seperate adsl and router for internet access. How can I use multiple gateways? One for the sip access and a seperate gateway for remote access. Regards,

One way i have resolved is setting up a service rule on customer router.

PBX uses the Gateway of customer router and not CISCO.

Set rule - any request from/to Gammas WAN IP's directs to Gammas Cisco on the LAN

You also need this rule for remote ITP's.

Gamma need to turn of DHCP they also need to open the media/MPS
ports.

Is the Gamma cisco router connected behind the customer's ADsl? Is the system then connected to the Cisco router or to the customers regular network?

If you are behind the Gamma router then you have to do the stuff through the cisco which will not be easy. If you are behind the ADsl modem then you can configure the router behind the modem for the ports you need to access the system.

Thanks guys, the equipt should be on site within a couple of days, Ill let you know how it goes.
Thanks