|
|
|
|
Joined: Aug 2003
Posts: 1,281
Moderator-Telrad
|
|
Moderator-Telrad
Joined: Aug 2003
Posts: 1,281 |
Having trouble setting up an IP phone off the network. I have the ports forwarded in the firewall and the mate ip address correct. I also have it set to nat transverse mode dynatic in the nat transverse.
Sip port 5080 is also been done.
Any Ideas
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2013
Posts: 122
Member
|
|
Member
Joined: Feb 2013
Posts: 122 |
i don't understand where is your problem otherwise
if you try to run the IP phone on the same network or over VPN or SHDSL dont need to make ports forward on your firewall and used port 5080 on the phone
if you try to run IP phone over internet on the remote site by NAT Transversal feature you need following below
PRG10-12-07 = Static public IP address (systemside).
PRG10-46-14 = On
PRG10-58-01 = Network address and Subnet mask ofDT700 LAN terminal via local router (if connected).
Port forwarding systemside
On the router connected to the SV8100 network, forward port UDP/5080 and UDP/5081 to the IPLA IP address in
PRG10-12-09.
Also forward the RTP ports (UDP/10020 - 10051) to the first VoIP gateway address in PRG84-26. More entries may
be required depending on the configuration and ifNetLink is used.
Port forwarding handset side
On the router connected to the handset network, forward port UDP/5060 to the IP address of the handset.
Also forward port UDP/3462 to the IP address of the handset.
NEC Business Partner
Certified on SV8100,SV8500,SL1000
|
|
|
|
|
Joined: Jul 2010
Posts: 38
Member
|
|
Member
Joined: Jul 2010
Posts: 38 |
Also make sure in the phone you DONT use the standard IP settings to set it up. Somewhere in advanced features or something of the phone's admin menu is a seperate menu for when using NAPT. You have to put in the public IP addresses of you SIP server (SV8100) and DRS etc in there instead. I often forget this and takes me a while to remember why the phone won't register...
- Now you can go out and "get the big bucks."
|
|
|
|
|
Joined: Apr 2005
Posts: 2,526 Likes: 4
Member
|
|
Member
Joined: Apr 2005
Posts: 2,526 Likes: 4 |
FYI, you need to upgrade system software to 8. Its free and NEC doesn't like giving support to older software versions.
We get old too soon, smart too late
|
|
|
|
Forums84
Topics94,491
Posts639,864
Members49,836
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
275
guests, and
87
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
