web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#549149 04/03/13 01:46 PM
Joined: May 2011
Posts: 391
Member
*
OP Offline
Member
*
Joined: May 2011
Posts: 391
Upograded 3 LCO8 cards with the CID daughter card. We are receiving CID but it will not display. Even using a name in display button it will not display. Anything more that has to be done? I found that the cards will now only work if set as 15 in flash 24.

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: May 2002
Posts: 17,722
Likes: 18
Member
****
Offline
Member
****
Joined: May 2002
Posts: 17,722
Likes: 18
Check the FAQ's and see if any of that helps. Let us know.


Retired phone dude
Joined: Jan 2008
Posts: 3,821
Retired Moderator
****
Offline
Retired Moderator
****
Joined: Jan 2008
Posts: 3,821
Cid doesn't display at all? Even when the call rings more than two rings? Do you have a ring delay set at 4 in flash 40 programming? If no ring delay set and the call is answered before two or three rings you won't get the info from the dialtone provider.

I have had issues with some carriers such as as Cox using HFC and the cid coming out of the Arris Arrays is not always compatible with the XTS cards.


www.myrandomviews
"Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about"

Retired, taking photographs and hoping to fly one of my many kites.
Joined: May 2011
Posts: 391
Member
*
OP Offline
Member
*
Joined: May 2011
Posts: 391
This is TWC Business analog trunk handoff. Ring delay is set for 0. I can hear CID after the second ring on my butt set. I'll bump it up to 4 and see what we get.

Joined: May 2011
Posts: 391
Member
*
OP Offline
Member
*
Joined: May 2011
Posts: 391
Justbill - nada. Nothing about caller ID on an XTS.

Joined: Jan 2008
Posts: 3,821
Retired Moderator
****
Offline
Retired Moderator
****
Joined: Jan 2008
Posts: 3,821
Jack, even with the ring delay set a 0 caller id should still display, you have to let it ring more than twice, before answered by a person or auto attendant. One other thing: I only trust what my eyes can see and that includes using a buttset with cid display as well.


www.myrandomviews
"Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about"

Retired, taking photographs and hoping to fly one of my many kites.
Joined: Aug 2003
Posts: 5,154
Likes: 2
Moderator-Vertical, Vodavi
*****
Offline
Moderator-Vertical, Vodavi
*****
Joined: Aug 2003
Posts: 5,154
Likes: 2
There was a problem with earlier models of the STS. They would not display CID from some sources unless you upgraded the firmware.

Have not seen this problem on the XTS, but we had a LOT more STS systems.

Joined: May 2011
Posts: 391
Member
*
OP Offline
Member
*
Joined: May 2011
Posts: 391
Derrick - I did let it ring many times, easily 8. No CID display. I installed an cordless SLT for them earlier and the SLT shows both name and number in the display. So the CID is being delivered. I'll be on site tomorrow.

Joined: Feb 2009
Posts: 3,136
Moderator-Vodavi, Vertical, XBlue
*****
Offline
Moderator-Vodavi, Vertical, XBlue
*****
Joined: Feb 2009
Posts: 3,136
Did you reset the system after setting the card type? Did you use the correct CID module? The 3031-03 requires P/N: 3031-04 when used on the XTS and 3031-05 when used on the XTSc.

Last edited by MNDAVE; 04/04/13 09:24 AM.

- Dave S. -

You can never appease your ideologue opponents.

Joined: Mar 2008
Posts: 457
Member
Offline
Member
Joined: Mar 2008
Posts: 457
First things first, did you turn on ICLID in flash 56?

I've had systems where I had to up the ring delay further than usual before CID came through... the manual says 5 but it seems like once I had to go up to 10 or even 12.

What FP is this system on?


"There is one thing and only one thing in which it is granted to you to be free in life, all else being beyond your power: that is to recognize and profess the truth." - Leo Tolstoy
Page 1 of 2 1 2

Moderated by  EV607797, JWRacedog, MnDave, nfcphoneman 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,694
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,703 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
pvj 4
Who's Online Now
2 members (teleco, BobRobert), 108 guests, and 249 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5