|
|
|
|
Joined: Nov 2005
Posts: 42
Member
|
|
Member
Joined: Nov 2005
Posts: 42 |
While reading through the install manual, I came across a part that says PCB verification. It says before connecting MDF cables, insert test cable to the first DLI port. Im looking inside the switch case now wondering where is the first SLI port and what test cable?
Any help would be appreciated.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2007
Posts: 27
Member
|
|
Member
Joined: Mar 2007
Posts: 27 |
Been a while since I installed one, but I never bothered with that step because it did not make sense. The 1st DLI Port is on the Amphenol connection.... Never heard of a Samsung DCSC "Test Cable"
Just hook it up and it should work.
We've got you by the Calls!
|
|
|
|
|
Joined: Nov 2004
Posts: 368
Member
|
|
Member
Joined: Nov 2004
Posts: 368 |
With no expansion its all on the p1 amp conn. Just double check your wiring to make sure its ok and hook it up. You sure don't want to run a ringing co into your dli ports that would be bad.
Last edited by frodo_35; 04/05/13 09:03 AM.
|
|
|
|
Forums84
Topics94,512
Posts639,934
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Touch Tone Tommy),
299
guests, and
29
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
