|
|
|
|
Joined: May 2013
Posts: 8
Member
|
|
Member
Joined: May 2013
Posts: 8 |
I work as a IT Admin for a grade school.
Purchased a used full iDCS 100 system on ebay primarily for the expansion cabinet and 8DLI cards to expand their present iDCS 100 system to put phones in all the classrooms. The price was right and the main cabinet would be saved for spares.
The expansion went smoothly. But I discovered the 'spare' system had its tech passcode changed and cannot get in to create a school backup on the MCP1 card. I dont care if I reset the entire spare system, just need to know how to default to factory.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2001
Posts: 2,360 Likes: 9
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,360 Likes: 9 |
You can default the system by turning off the switch on the MCP card.
|
|
|
|
|
Joined: May 2013
Posts: 8
Member
|
|
Member
Joined: May 2013
Posts: 8 |
MCP switch has been off and power supply unplugged all weekend still unable to get past Enter Passcode using SIO connection.
I pulled the card, shorted the supercapacitor without any success.
Also the IP address is not default of 192.168.1.80 so I cant get in that way either.
|
|
|
|
|
Joined: Sep 2004
Posts: 395
Member
|
|
Member
Joined: Sep 2004
Posts: 395 |
Can you get in via KMMC, a telephone?
|
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
That ip is not the default ip that the systems come with from the factory, it sounds like that was the ip your system was configured with
|
|
|
|
|
Joined: May 2013
Posts: 8
Member
|
|
Member
Joined: May 2013
Posts: 8 |
@Michael V - I will need to breakout an Amphenol cable to connect digkey phone. What do you have in mind?
@nameless - I posted the incorrect IP, tried the default per the manual with no luck. Cannot ping IP either.
|
|
|
|
|
Joined: Sep 2004
Posts: 395
Member
|
|
Member
Joined: Sep 2004
Posts: 395 |
To see if you can get into programming with the default passcode, check the software version, ip address, etc. You would need the correct OfficeServ Manager version to talk to it(I'm assuming that is what you mean by sio). Plus there is a clear db option you can do through KMMC.
|
|
|
|
Forums84
Topics94,518
Posts639,974
Members49,849
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
