sundance-communications.com/forum Forums TDM Business Telephone Systems Panasonic Telephones & Systems Remote Page

Is there a way in TDE-100 to perform a remote page across the IP network to a remote TDE-100. The two systems are conencted via the V-IPGW card. They want to perform an internal phone page from the one office across the network to the phones in the other office. Any ideas?

So to be clear you want to page the sets in both systems at the same time? I'm not sure that can be done...

Put an IP phone from Main system at 2nd location and tie spk output into their page system. All page from main will then page 2nd location.

We don't need to page both sets at both locations at the same time. We need to page the sets at location "B" from one of the sets at location "A". Basically, can a phone at location "A" dial a code to access page group #1 in the system at location "B". There is no external page system at either location so we cannot tie into an existing page system.

I think that should be possible

Can you dial an ext at remote location?
Have you tried dialing Page Zone instead of ext number?

I have a feeling you can do so.To dial an extension at the remote location, you fist dial the Remote PBX access cod.Right?.
Once you are in the remote PBX through remote access code, do the page as though you are at an extension in the remote location.

Try that. I haven't done that though.

Yes it can be done. PM me with your email addy and I'll send you the .doc but there are certain things you need in both systems for it to work. Also if you or anyone are interested I just finished setting up paging multiple sites

Toby,

Never mind the the PM. I found your emailaddress in your profile and sent you the document