|
|
Joined: Aug 2013
Posts: 1
Member
|
OP
Member
Joined: Aug 2013
Posts: 1 |
Hi all,
I work for a charity and two years ago we installed a samsung DCS 2 in a hospital in Africa. The system is used for internal use this is not connected to a outside line. the internal telephones have been used to communicate been wards and we assigned extension number 222 for the emergency response team. Unfortunately the motherboard has blew a chip and now the system is not working we are therefore send out a second hand dcs 2 unit to replace the faulty unit.
My questions are
Is their any programming needed to be done before we send the new system out ie a factory reset?
If so what would the procedure be?
Thank you for helping
Nigel
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jun 2005
Posts: 574
Member
|
Member
Joined: Jun 2005
Posts: 574 |
Nigel If you are using the system for internal use only and the extn numbers are the default numbers I would just default the system program date and time and away you go
|
|
|
Forums84
Topics94,262
Posts638,697
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
140
guests, and
24
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|