|
|
|
|
Joined: Nov 2011
Posts: 25
Member
|
|
Member
Joined: Nov 2011
Posts: 25 |
Guys, I am using OS7200 V4.70, got the SIP trunk License, and managed to register the SIP trunk but, not sure how to set Outbound and Inbound. (Incoming always rings to default ring group 500, even I set at 406)
I tried to set the Outgoing digits @832, still can't call out.
Need experts Help.
Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2011
Posts: 219
Member
|
|
Member
Joined: Aug 2011
Posts: 219 |
Try this:
1. dial the SIP trunk group direct and try to make an outgoing call from there
2. If successful, configure LCR
heads up
|
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
SIP trunks use the DID table for incoming calls by default.
The outgoing digits need to be set in the CLI table, the table number is defined in the sip trunk configuration section.
|
|
|
|
|
Joined: Nov 2011
Posts: 25
Member
|
|
Member
Joined: Nov 2011
Posts: 25 |
Thanks guys...it works now both outgoing n incoming.
|
|
|
|
Forums84
Topics94,580
Posts640,269
Members49,879
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
